#11

Soap Sniffers Anonymous
Edmonton
(06-14-2022, 06:03 AM)ExtraProtein Wrote: [Image: lsg14px.jpg]
[Image: ygB6yAn.jpg]

(06-29-2022, 09:54 PM)AylsworthRazors Wrote:
(06-22-2022, 03:54 AM)Marko Wrote: I thought I’d start a thread for those of who own, or are considering owning the Aylsworth Drakkant DE Razor so that we can discuss the razor apart from the Pass Around thread. 

I participated in the pass around and was impressed with the Drakkant. I wound up buying one when they became available. The pass around razor was the basic steel finish and I opted to upgrade to the bead blasted finish. I think that was the right move for me. First, the basic finish is pretty industrial and the blasted finish is a nice looking upgrade and secondly, my one criticism of the pass around razor was that it could be a little “draggy”. I didn’t know if it was a function of the finish or the geometry. Well, now that I have the blasted finish I’d say it was a function of the finish because I don’t find the blasted finish razor to drag the same as the pass around basic finish razor. I’m pretty happy about that. It wasn’t a deal breaker (obviously I bought it) but it’s nice to not have that. I’m really happy with the Drakkant and I’ve been using it every shave with a Feather blade for a couple of weeks now. My only suggestion (not really a criticism) is that the stylized A Aylsworth logo engraved into the end of the handle could be engraved a little deeper. It’s very subtle. It’s also pretty cool that they’re numbered. Also, in the first picture in the next post, that’s a Rockwell stand. I don’t recall if Aylsworth offered a stand for sale.

Just discovered this new thread. Thanks for the kind words! Stand is in the works along with the 0.99 mm + plate and OC plates. Hoping to release in the fall of this year.

Can't wait for the H plate

Calm_Shaver likes this post
#12
(06-29-2022, 08:44 PM)Senate515 Wrote: I think the Drakkant and Overlander are very similar razors, I own both and was waiting for a stainless Overlander to use as my travel razor but since I have the Drakkant I may not need it

I found some differences between the Overlander and Drakkant.  The Overlander shaves significantly closer on a par with some of my more efficient razors such as the SS BB and Wolfman SB 1.25 and without irritation if I'm not paying attention.  I find the Overlander to have a fair amount of drag.  Sometimes it doesn't bother me, but sometimes it's like fingernails on a chalkboard.  The shave is so efficient that I keep coming back to it and I have to work very hard at it to cause any irritation.

I find the Drakkant to have no drag and to be a mild razor with fairly low efficiency.  To get a shave that approaches the Overlander I need to do multiple passes that eventually cause significant irritation.  For me, the Drakkant is the low efficiency razor I thought it would be and hoped it wasn't.  It went into the closet until a more efficient plate is released.

Calm_Shaver, Mpescado, MaineYooper and 2 others like this post
#13

Posting Freak
As I said, razors are subjective - I find the Drakkant with a Feather blade to be very smooth and efficient.  Three pass shave zero irritation.   Happy2 Happy2 Happy2  Thats the beauty of getting in on a pass around - you can try out a razor and see if it works for you.  I haven't had irritation from shaving in years.  I think its often a factor of skin sensitivity and while some hardware/software may be better or worse irritation wise for an individual, its rarely (never?) a case that a specific razor will generally cause irritation for everyone. Just look at the blade thread, there are as many people that hate a given blade as love it

Dave in KY, TheBurgh and Marhos24 like this post
#14

Posting Freak
I put a fresh Feather in the Drakkant for yesterday’s shave. Beautiful. Like is there even a blade in there? Wait!! Where did my whiskers go?? I guess if you crave a lot of blade feel then you might not like this razor, or at least with this plate. I like a good smooth and efficient shave which is what this razor gives me. If I were to keep going over and over looking for blade-iness then I’m pretty sure I could cause some irritation. Each to their own.

TheBurgh, AylsworthRazors, Mpescado and 1 others like this post
#15
(This post was last modified: 07-15-2022, 10:39 PM by AylsworthRazors.)
FYI  Drakkant razors in both finishes are back in stock! 

This standard daily shaver model won't be back again until the fall when the + plate launches, and even then supplies will be limited in order to make room for the + models during that release.  So if you like a comfortable daily shaver style razor, this is probably the best time to grab the 0.73 mm standard Drakkant until the new year.

https://aylsworthrazors.com/

Marko likes this post
#16

Posting Freak
I’ve been enjoying the Drakkant with both the + and the OC plates but probably like the OC a bit more. It’s funny because I like the original plate and the + with a Feather blade but find the Feather to be a bit harsh in the OC. So far I’m liking the Israeli red personna in the OC for a really nice shave. 

[Image: c5R9Hxr.jpg][Image: 1qXpRND.jpg]

rocket, AylsworthRazors, Marhos24 and 2 others like this post
#17
I’m happy you used the term ‘drag’ as I’ve been searching for a way to describe what I feel when shaving with certain razors.  I used think of it as a ‘squeegee’ action.

Just sold my KARVE CB - Just haven’t used it since I picked up my Timeless Ti 95 SB. I like this razor as it really smooth, however, I need a bit more efficiency for the final clean ups of my shave.  Let’s just say that my Timeless is very smooth, without much drag, but I but more from it.   

I’ll need to raise a bit more cash before buying another razor. Open to recommendations

Marko likes this post
#18

Posting Freak
I used the Drakkant with the + plate and a fresh Feather blade. Superb shave  Happy2  I think it’s a draw between this setup and the OC / Israeli red setup. So nice.

Marhos24, ALI and Mpescado like this post
#19

Posting Freak
Shaved with the Drakkant OC with a GSB yesterday. Here’s a look at how the Drakkant locks down the blade. I didn’t care for the GSB in the Drakkant OC. Much prefer the personna platinum. 

[Image: dQZWXsZ.jpg][Image: tPcbWe8.jpg]

Marhos24, ALI, HOLYZEUS and 2 others like this post
#20

Member
Gatineau, QC, Canada
(This post was last modified: 08-30-2024, 05:21 PM by AlanH81.)
(06-22-2022, 03:54 AM)Marko Wrote: I thought I’d start a thread for those of who own, or are considering owning the Aylsworth Drakkant DE Razor so that we can discuss the razor apart from the Pass Around thread. 

I participated in the pass around and was impressed with the Drakkant. I wound up buying one when they became available. The pass around razor was the basic steel finish and I opted to upgrade to the bead blasted finish. I think that was the right move for me. First, the basic finish is pretty industrial and the blasted finish is a nice looking upgrade and secondly, my one criticism of the pass around razor was that it could be a little “draggy”. I didn’t know if it was a function of the finish or the geometry. Well, now that I have the blasted finish I’d say it was a function of the finish because I don’t find the blasted finish razor to drag the same as the pass around basic finish razor. I’m pretty happy about that. It wasn’t a deal breaker (obviously I bought it) but it’s nice to not have that. I’m really happy with the Drakkant and I’ve been using it every shave with a Feather blade for a couple of weeks now. My only suggestion (not really a criticism) is that the stylized A Aylsworth logo engraved into the end of the handle could be engraved a little deeper. It’s very subtle. It’s also pretty cool that they’re numbered. Also, in the first picture in the next post, that’s a Rockwell stand. I don’t recall if Aylsworth offered a stand for sale.
It’s a fantastic razor I just ordered my in standard baseplate and plus with stand, it is in machining finish which I’ll get it polished to perfection when time given!

That being said I would classify the Drakkant as a top-tier razor with artisan levels of detail, and it has something for every discerning wet shave enthusiast but ymmv again!!

Pros:
Unique design.
Precise finish.
Aesthetically pleasing to the eye.
Very easy to work with.

Come: For me personally None!!

I’ll be looking in future to get Ti as well!!

On another note their packaging is really nice which I appreciate it very much.

Cheers 


Alan H

Calm_Shaver, Marko and AQU like this post
"Strive not to be a success, but rather to be of value."

  - Albert Einstein


Users browsing this thread: 1 Guest(s)