#41

Merchant
San Diego CA
(07-24-2021, 01:14 AM)GlazedBoker Wrote: Disaster struck just a little while ago. I’m just disgusted at what has happened. Taking my SOTD pic for today’s shave off with the Slim and this is what happened.

The Sailor fell about 14’ from my balcony onto the sidewalk in my backyard. It’s a paperweight now…


[Image: ZECaKMS.jpg]

[Image: 5TiPFGM.jpg]

[Image: ac1qSf8.jpg]

[Image: NeSCbgf.jpg]

I need a drink or two…..

Looks very fixable to me unless there is unseen damage. Good thing this tank is overbuilt because it looks like you avoided bending anything which would be the hardest to fix. This is just added character.

Snuff, Scaramouche, GlazedBoker and 3 others like this post
#42

Member
Atlanta, GA
(07-24-2021, 01:14 AM)GlazedBoker Wrote: Disaster struck just a little while ago. I’m just disgusted at what has happened. Taking my SOTD pic for today’s shave off with the Slim and this is what happened.

The Sailor fell about 14’ from my balcony onto the sidewalk in my backyard. It’s a paperweight now…


[Image: ZECaKMS.jpg]

[Image: 5TiPFGM.jpg]

[Image: ac1qSf8.jpg]

[Image: NeSCbgf.jpg]

I need a drink or two…..

I am so sorry Gus. I hope you are able to get it sorted out.

GlazedBoker, Frl2 and Snuff like this post
Clint
#43
Wow Gus I’m so sorry my brother! I’d be poring a stiff one to. Is it not functional or is it just the finish?

Frl2, Snuff, keto and 1 others like this post
#44
Oh shoot Gus,  that stinks.  Gonna take some SS cosmic surgery of some sort. Yeah I'd think it can be recovered.
 Doesn't look like it's bent, or is it?

LOOT, Snuff and Frl2 like this post
            Keith
#45

It's sharp and it cuts. I like it...
Northeast, USA
(This post was last modified: 07-24-2021, 02:08 AM by GlazedBoker.)
(07-24-2021, 01:27 AM)Blackland Razors Wrote:
(07-24-2021, 01:14 AM)GlazedBoker Wrote: Disaster struck just a little while ago. I’m just disgusted at what has happened. Taking my SOTD pic for today’s shave off with the Slim and this is what happened.

The Sailor fell about 14’ from my balcony onto the sidewalk in my backyard. It’s a paperweight now…


[Image: ZECaKMS.jpg]

[Image: 5TiPFGM.jpg]

[Image: ac1qSf8.jpg]

[Image: NeSCbgf.jpg]

I need a drink or two…..

Looks very fixable to me unless there is unseen damage. Good thing this tank is overbuilt because it looks like you avoided bending anything which would be the hardest to fix. This is just added character.

(07-24-2021, 01:44 AM)Dragonsbeard Wrote: Wow Gus I’m so sorry my brother! I’d be poring a stiff one to.  Is it not functional or is it just the finish?

(07-24-2021, 01:44 AM)keto Wrote: Oh shoot Gus,  that stinks.  Gonna take some SS cosmic surgery of some sort. Yeah I'd think it can be recovered.
 Doesn't look like it's bent, or is it?

The ends on one side of the safety bar are slightly rolled. Has roughened dimples along the guard which I believe may be buffed out. It’s the rolled corners on the safety bar that have me a bit concerned. I’ll send an email in the morning and go from there. It’s just a razor and there are way more important things going on but, it still stings a little. We’ll see…..

Snuff, Dragonsbeard, CK89 and 6 others like this post
#46
Sorry this happened to you.  I know your pain.  I was gutted when it happened to me. 

First one was my 2020, chipped the corner on the middle of the top cap while washing it vigorously on my facet head.  Waited about 9 months until I received a replacement top cap from Murat, along with my order of the 2021.

I also managed to mess up my 2021.  It fell onto my Parker 94R when I was reaching for it and toppled off the stand, landed onto the knurling of the Parker..if you've seen the knurling on the Parker you'd know why.  Damages to the left underside of the lather channel.

Now admittedly my damages are nowhere near yours, but I will be seeking repair on it in the near future.  I'm going to try to find a local jewelry repair shop.  I think they can use some metal filler to repair the chips and deformity, and buff out the scratches.
[Image: CRkb0WK.jpg]
[Image: cnscmAX.jpg]

Snuff, AQU, Calm_Shaver and 4 others like this post
#47
Gus if it’s not reparable I’ll be the first to contribute $100 towards getting you a new one as I know. you were very excited to get one my friend. Please. keep us posted on what Murat says.

Snuff, AQU, Gopneg and 3 others like this post
#48

Merchant
San Diego CA
(This post was last modified: 07-24-2021, 03:34 AM by Blackland Razors.)
(07-24-2021, 02:05 AM)GlazedBoker Wrote: The ends on one side of the safety bar are slightly rolled. Has roughened dimples along the guard which I believe may be buffed out. It’s the rolled corners on the safety bar that have me a bit concerned.

Once you're feeling better about it, stick a blade in there and see if the safety bar was affected in such a way as to expose more of the blade. If not, you should be good to go.

Edit to explain better: The cutting edge is ~37mm. If the safety bar was rolled inward to make the safety bar shorter, say 35mm, then I'm not sure that's very fixable. It doesn't look like that's the case to me.

Dragonsbeard, Snuff, AQU and 1 others like this post
#49
(This post was last modified: 07-24-2021, 04:14 AM by Calm_Shaver.)
OMG, I am so sorry my friend. Gus, I feel your pain, That stings. I’m really hoping Murat can help you out somehow. Hoping it will all work out in the end, maybe its cosmetic and this tank can still shave well. Fingers crossed for you my Friend.

Snuff, GlazedBoker and Dragonsbeard like this post
#50

Member
Indiana
if he will be ok to fix it, I recommend you to get a shipping advice from him.
There are 20% import fees, he might help you not to pay this fee for service.

Snuff, Dragonsbeard, LOOT and 1 others like this post


Users browsing this thread: 1 Guest(s)