#871

Scentsless Shaver
Oakland, ME
Today was almost a 3-peat, as I changed the brush to the Razorock BC silvertip synthetic. Another great shave with the Type M @6 and the twin blades.
Still waiting to hear something re: surgery for my wife. Our local GI office has been "pushing" it, they tell us, but no calls here. I am going to call today after any lunch times the office may keep.

It's almost the weekend! SEptember has been going well for me, and I think I'll either break out the General soon. Time for more AC goodness!

Stay well!

HighSpeed, keto, Dave in KY and 3 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#872
Stay on ‘em. I’ve had to do that before as well.

Stubble Daddy, HighSpeed and MaineYooper like this post
-Tim

-Another satisfied Fluffy Industries customer - V2 Mini Copper.
-Proud member of Club Oscuro - Trotter Handcrafts Costa Oscuro.
#873

Scentsless Shaver
Oakland, ME
(09-10-2021, 06:16 PM)MilkCrate Wrote: Stay on ‘em. I’ve had to do that before as well.

Thanks, Tim, I appreciate hearing that. Just seems wrong that there is no good follow up, even an email saying they are still working on it. I now, I am being unrealistic. Given my work, I can't stop and inform every single person about an issue with the prescription. We try to follow up on anything that causes a delay, like have to order product. But insurance and Pharmacy Benefits Mangers (evil middle men) throw up so many roadblocks to finishing an rx, that we couldn't call everyone. Though it would be cool if an automated text or email could be sent saying "your prescription is in insurance jail, awaiting bail money."   Tongue

HighSpeed, Stubble Daddy and MilkCrate like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#874

Scentsless Shaver
Oakland, ME
SEptember 11 shave

Comparison shave today, using an M1 with a sChick (5) blade to compare to the Schick II (5) used yesterday in the M2. (Just coincidence that the blade use was the same for both! Couldn't have done better if I tried to!)
Yaqi Mysterious Space tuxedo brush
MWS Sensitive Skin

So to my mug the M1 set at 6 had more blade feel than the M2 at 6. The shave was great, although I achieved a couple of small nicks at one corner of my mouth, which we will blame on me. Refreshed with some Thayer's WH original, and a cold water splash! Overall, the shave didn't quite seem as care-free as the twin blade counterpart, so I will most likely stay around 5 on the M1. I love the glass-like finish, but want comfort more than dolphin. The M2 gave both comfort and glass smooth at 6, so yay for that!

Hope you all have a great weekend. Light duty here, but hoping for a quiet weekend!

mrdoug, Dave in KY, HighSpeed and 2 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#875

Scentsless Shaver
Oakland, ME
SEptember continues!

This week, the General V2 from Colonial Razors is the instrument of choice, paired with a Timeless TRH6 Spiral Ti handle.
Schick Proline (starting 8th use)
Ethos Clean
Brushes will be 24mm ones, shown is the Knothead Violet macro-pearl white swirl with a cashmere knot.

[Image: xEMq75X.jpg]

Great shave today, and this is the first use of the Timeless handle. It is a Mary Poppins handle for me!
[Image: Cna7hhZ.png]

Let's enjoy the day, and get ready to do it to Monday before it does it to us!!

Dave in KY, Stubble Daddy, HighSpeed and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#876

Scentsless Shaver
Oakland, ME
On Monday's shave, it seemed like the General was not gliding well. I figured maybe the soap wasn't as slick as this razor preferred, so I added more (tip dip only) water on pass 2. Still the head seemed to drag, reminding me of my Vector shaves. So as I had a few extra minutes that morning, I pulled out a different brush and the Zingari Man for pass 3. Marginally better but still some drag.

Today, I used Canada shave soap for pass 1. About the same as Zingari. So another brush and Mike's Natural used for a spilt face comparison. Mike's definitely more slick, with only a little drag. The General is not polished, so this may factor in as well as user error. Tomorrow I may try with another soap. I need to look up what I used in the past with this razor, and nail down is it me or the soap or some combo!

But as Tim says, Life is good and I am RCS and refreshed for the day. Good news on the surgeon front, which I will update when I have more time. I need to finish dressing, bus my dishes, fill the coffee mug, and get to work!

Here's to a Tuesday that is better than Monday! (Monday's always seem to get an extra sprinkling of fairy dust from the Suck Fairy!!)

mrdoug, MilkCrate, HighSpeed and 2 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#877

Custodian of the Shogun Edge technique
Peoples Republic of Maryland
Dang Eric. Your pursuit of smooth is impressive. 
Methodical.

HighSpeed and MaineYooper like this post
#878

Scentsless Shaver
Oakland, ME
As Fluffy called, my methodical approach peaked this morning. The Proline in the General had been used for a week in the Hawk, and I remember purposefully flipping the blade when I loaded the General. So I got to thinkin' (dangerous at the best of times!) and decided to flip it back. And Shannon's Nil was the soap I used first with the General, so out it came. Well, not much different than with the other soaps. So I flipped the blade back, rinsed the brush, and continued with Ethos Clean, as it was to be the soap this week.

I think my drag issue (no, not dressing up and going to that  club!) is that I just spent a week shaving with injectors, and they glide so well for me that at times I am not sure I have the blade making contact! And if I hold the General a tad steeper, no drag, but more blade feel. It may be as simple as that. In any event, a wonderful shave, really comfortable (my goal RCS) and refreshing feeling. I just dig feeling refreshed instead of that tingly raw feeling when things go awry. 

Hump day is a day off, try to take care of bill paying (propane delivered for the first of the season) and just recovering from Monday and Tuesday. Work has been nuts. On Thursday, I was to report an hour early so tech could come and start replacing/upgrading hardware. Guess how that went! Two screens give you a headache if you use them due to fuzziness (wrong cables provided) and one screen doesn't fit the stand, so it is propped up against the wall. Nice. and it took over 9 hours, which pretty much stopped my in my tracks. And as each terminal was replaced (we have 8), I had an extensive list to run through to make sure they worked. Several 30+ minute calls with support, as tech replacing was only hardware, not software. I am almost bald now from pulling my hair out! 

TL;DR: we are still trying to catch up. Makes for lots of disgruntled patients, which I get, but it is so hard sometimes NOT to tell them to eff off, it's just your ED med!!

Medical update forthcoming! Good news!

Stubble Daddy and HighSpeed like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#879

Just Here for the Shaves
Williamsburg, KY
I was going to say Eric that if you changed razors you need to be mindful of changing your muscle memory to match them. That may be the issue with the drag. Something I am always cognizant of as I change razors daily.

Glad good news is happening at home at least. Work is............................why it's called work Cool

HighSpeed, Marko, mrdoug and 1 others like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#880
(09-15-2021, 08:01 PM)MaineYooper Wrote: I think my drag issue (no, not dressing up and going to that  club!)



Makes for lots of disgruntled patients, which I get, but it is so hard sometimes NOT to tell them to eff off, it's just your ED med!!

Medical update forthcoming! Good news!

Oh my! Hang in there man!

Thankfully good news on the medical front.

MaineYooper, mrdoug and HighSpeed like this post
-Tim

-Another satisfied Fluffy Industries customer - V2 Mini Copper.
-Proud member of Club Oscuro - Trotter Handcrafts Costa Oscuro.


Users browsing this thread: 2 Guest(s)