#4,611

Member
gone to Carolina in my mind
Doing fine Dave. Thanks.
Technique Trumps Tools
Skin Care Trumps Skin Repair

Be Cool, be Kind, and be Well
--  Mike --
#4,612

Just Here for the Shaves
Williamsburg, KY
Tuesday January 2, 2023
Razor: CG Every Day Razor
Blade: Wizamet
Brush: Stirling-Zenith/Boar
Soap: Stirling Deton-8
AS : Witch Hazel + Stirling Deton-8
Fragrance: V&R Spicebomb
Consecutive Daily Shaves - # 1,882
[Image: hN7BxgW.jpg]

canpo1907, dtownvino, HighSpeed and 1 others like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#4,613

Scentsless Shaver
Oakland, ME
(01-02-2024, 09:58 AM)Dave in KY Wrote: Tuesday January 2, 2023
Razor: CG Every Day Razor
Blade: Wizamet
Brush: Stirling-Zenith/Boar
Soap: Stirling Deton-8
AS : Witch Hazel + Stirling Deton-8
Fragrance: V&R Spicebomb
Consecutive Daily Shaves - # 1,882
[Image: hN7BxgW.jpg]

That boar looks likes it already splitting its ends, nice! If I recall, you don't do any of those ice water soaks but just use the thing after a test lather or two. I have 4 nice boars already, but I don't have whatever this knot is (Zenith or Omega?). I will not go to the Stirling site. I will not go to ....   Big Grin

mrdoug and Dave in KY like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#4,614

Just Here for the Shaves
Williamsburg, KY
(This post was last modified: 01-02-2024, 05:29 PM by Dave in KY.)
(01-02-2024, 05:26 PM)MaineYooper Wrote:
(01-02-2024, 09:58 AM)Dave in KY Wrote: Tuesday January 2, 2023
Razor: CG Every Day Razor
Blade: Wizamet
Brush: Stirling-Zenith/Boar
Soap: Stirling Deton-8
AS : Witch Hazel + Stirling Deton-8
Fragrance: V&R Spicebomb
Consecutive Daily Shaves - # 1,882
[Image: hN7BxgW.jpg]

That boar looks likes it already splitting its ends, nice! If I recall, you don't do any of those ice water soaks but just use the thing after a test lather or two. I have 4 nice boars already, but I don't have whatever this knot is (Zenith or Omega?). I will not go to the Stirling site. I will not go to ....   Big Grin

Nothing done to this one but used it 2 or 3 times so far. I have the 28mm (smaller one) Here let me help you Big Grin
https://www.stirlingsoap.com/products/ze...8mm-x-46mm
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#4,615

Scentsless Shaver
Oakland, ME
(01-02-2024, 05:29 PM)Dave in KY Wrote:
(01-02-2024, 05:26 PM)MaineYooper Wrote:
(01-02-2024, 09:58 AM)Dave in KY Wrote: Tuesday January 2, 2023
Razor: CG Every Day Razor
Blade: Wizamet
Brush: Stirling-Zenith/Boar
Soap: Stirling Deton-8
AS : Witch Hazel + Stirling Deton-8
Fragrance: V&R Spicebomb
Consecutive Daily Shaves - # 1,882
[Image: hN7BxgW.jpg]

That boar looks likes it already splitting its ends, nice! If I recall, you don't do any of those ice water soaks but just use the thing after a test lather or two. I have 4 nice boars already, but I don't have whatever this knot is (Zenith or Omega?). I will not go to the Stirling site. I will not go to ....   Big Grin

Nothing done to this one but used it 2 or 3 times so far. I have the 28mm (smaller one) Here let me help you  Big Grin
https://www.stirlingsoap.com/products/ze...8mm-x-46mm

Thanks! I think.

And I just rewatched your video on it, and yup, straight out of the box and very soft. Nothing like a good boar. I went searching for the Tatara boar in the dark handle to match my Masamune, but find the loft a little too low. Not at all pokey, and it is a Semogue, but between the shorter loft and the weight, I may move it on and pick up a Stirling!

HighSpeed likes this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#4,616

Just Here for the Shaves
Williamsburg, KY
(01-02-2024, 05:33 PM)MaineYooper Wrote:
(01-02-2024, 05:29 PM)Dave in KY Wrote:
(01-02-2024, 05:26 PM)MaineYooper Wrote: That boar looks likes it already splitting its ends, nice! If I recall, you don't do any of those ice water soaks but just use the thing after a test lather or two. I have 4 nice boars already, but I don't have whatever this knot is (Zenith or Omega?). I will not go to the Stirling site. I will not go to ....   Big Grin

Nothing done to this one but used it 2 or 3 times so far. I have the 28mm (smaller one) Here let me help you  Big Grin
https://www.stirlingsoap.com/products/ze...8mm-x-46mm

Thanks! I think.

And I just rewatched your video on it, and yup, straight out of the box and very soft. Nothing like a good boar. I went searching for the Tatara boar in the dark handle to match my Masamune, but find the loft a little too low. Not at all pokey, and it is a Semogue, but between the shorter loft and the weight, I may move it on and pick up a Stirling!

This loft could be higher for me but then you'd lose the backbone some too I guess. You may prefer the 31mm if the loft is higher. While this could be higher it still works for me. Hope you find a good fit !

HighSpeed and MaineYooper like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#4,617

Scentsless Shaver
Oakland, ME
(01-02-2024, 05:36 PM)Dave in KY Wrote:
(01-02-2024, 05:33 PM)MaineYooper Wrote:
(01-02-2024, 05:29 PM)Dave in KY Wrote: Nothing done to this one but used it 2 or 3 times so far. I have the 28mm (smaller one) Here let me help you  Big Grin
https://www.stirlingsoap.com/products/ze...8mm-x-46mm

Thanks! I think.

And I just rewatched your video on it, and yup, straight out of the box and very soft. Nothing like a good boar. I went searching for the Tatara boar in the dark handle to match my Masamune, but find the loft a little too low. Not at all pokey, and it is a Semogue, but between the shorter loft and the weight, I may move it on and pick up a Stirling!

This loft could be higher for me but then you'd lose the backbone some too I guess. You may prefer the 31mm if the loft is higher. While this could be higher it still works for me. Hope you find a good fit !

Thanks for pointing that out. As there are only 3 left, I am going to pass. The three boars I do have work great and have lofts greater than 55mm, so I know what I like! Once you mentioned the shorter loft, I watched more carefully and I could see it had a more controlled splay. Me and too much backbone don't get along! I may not be full on floppy, but I do like less backbone, ha ha!

HighSpeed, mrdoug, Dave in KY and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#4,618

Just Here for the Shaves
Williamsburg, KY
(01-02-2024, 05:43 PM)MaineYooper Wrote:
(01-02-2024, 05:36 PM)Dave in KY Wrote:
(01-02-2024, 05:33 PM)MaineYooper Wrote: Thanks! I think.

And I just rewatched your video on it, and yup, straight out of the box and very soft. Nothing like a good boar. I went searching for the Tatara boar in the dark handle to match my Masamune, but find the loft a little too low. Not at all pokey, and it is a Semogue, but between the shorter loft and the weight, I may move it on and pick up a Stirling!

This loft could be higher for me but then you'd lose the backbone some too I guess. You may prefer the 31mm if the loft is higher. While this could be higher it still works for me. Hope you find a good fit !

Thanks for pointing that out. As there are only 3 left, I am going to pass. The three boars I do have work great and have lofts greater than 55mm, so I know what I like! Once you mentioned the shorter loft, I watched more carefully and I could see it had a more controlled splay. Me and too much backbone don't get along! I may not be full on floppy, but I do like less backbone, ha ha!
Glad I got to you in time. Cheers

HighSpeed and MaineYooper like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#4,619

Just Here for the Shaves
Williamsburg, KY
Wednesday January 3, 2023
Razor: Blackland Vector Ti
Blade: Feather Pro
Brush: Rubberset 400/Cashmere
Soap: Wholly Kaw Pasteur's Alchemy
AS : Witch Hazel + Wholly Kaw Pasteur's Alchemy
Fragrance: Wholly Kaw Pasteur's Alchemy
Consecutive Daily Shaves - # 1,883
[Image: HiGgRDL.jpg]

ewk, mrdoug, HighSpeed and 1 others like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#4,620

Just Here for the Shaves
Williamsburg, KY
(This post was last modified: 01-04-2024, 11:00 AM by Dave in KY.)
Thursday January 4, 2023
Razor: Rockwell 6S
Blade: Vintage Wizamet (Made in Poland)
Brush: Wolf Whiskers/Blackwolf
Soap: Ethos Vétivert
AS : Witch Hazel + Ethos Vétivert
Fragrance: Tom Ford Grey Vetiver
Consecutive Daily Shaves - # 1,884

Edit: posted last night and just had the shave. These Poland Wizamets shave most like the current stash I have about 1,000 of. Sharp and SMOOOOTH as can be. Are they better than what I have? I don't think so but they are on par after the first shave. Very thankful to the generous Vesper for giving me the chance to try these !
[Image: YaBWvei.jpg]

MaineYooper, TommyCarioca, canpo1907 and 2 others like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin


Users browsing this thread: 3 Guest(s)