#1
I have used a DE but really want a shavette or straight .. any suggestions or help would be appreciated very much
#2
(09-26-2022, 07:33 PM)2013cossj Wrote: I have used a DE but really want a shavette or straight .. any suggestions or help would be appreciated very much

I can't tell you which vendor to get one from, but you won't find a better shave from a 'shavette' than from a Feather Artist Club.

The Feather Proguard blades are as sharp as they come, and last. 

The Artist Club can be had with plastic or some sort of wood handles and are expensive, but highest quality.

They come up on the BST from time to time.

AlanH81 likes this post
#3
(09-26-2022, 07:33 PM)2013cossj Wrote: I have used a DE but really want a shavette or straight .. any suggestions or help would be appreciated very much


https://www.amazon.com/CELOX-Temporary-T...B0032UY9BQ
Secretary Ramsey put his foot into it yesterday . . . in the course of his remarks he said that California “needs water and better society.”  “So does h-ll,” yelled someone in the crowd.  
#4
Thanks for the reply man 
I was just able to sort my log in details after a year
#5
(This post was last modified: 09-19-2024, 05:53 PM by Tedolph.)
Well, let me say this......

You have to have a very good technique with a shavette, and that is a challenge for someone just starting out. If you get a Feather Artist Club and use a Feather Stainless blade in it that is wicked sharp. Way sharper than most of us maintain our conventional straight razors. I would say that my straights are about as sharp as a Feather stainless steel blade after the second or third shave.

I know this will be controversial, but I think an inexpensive place to start is with a Gold Dollar, either 100/200/300, a Model 66 or a Model 1996 which has been honed by a reputable hone master. It will be cheap, sharp enough to shave, and a much more forgiving geometry than a shavette.

Bambam likes this post
#6

Veni, vidi, vici
Vault 111
(02-24-2024, 12:23 AM)Tedolph Wrote: Well, let me say this......

You have to have a very good technique with a shavette, and that is a challenge for someone just starting out.  If you get a Feather Artist Club and use a Feather Stainless blade in it that is wicked sharp.  Way sharper than most of us maintain our conventional straight razors.  I would say that my straights are about as sharp as a Feather stainless steel blade after the second or third shave. 

I know this will be controversial, but I think an inexpensive place to start is with a Gold Dollar, either 100/200/300, a Model 66 or a Model 1996 which has been honed by a reputable home master.  It will be cheap, sharp enough to shave, and a much more forgiving geometry than a shavette.

+1

Tedolph likes this post
~~~~
Primo
Shaving since 1971; enjoying my shaves since 2014
A che bel vivere, che bel piacere, per un barbiere di qualità! Happy2
#7

Just Here for the Shaves
Williamsburg, KY
Vintage Weck with the guard to start but a better shave without the guard. Takes hair shaper blades but get the Weck Straight, NOT the Hair Shaper Weck as the guard is not for shaving on that one.
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#8

Member
Quebec, Canada
Is this what’s called a sextoblade?

Dave in KY likes this post
--
Ce message provient du Québec!  Happy2
#9

Just Here for the Shaves
Williamsburg, KY
(02-24-2024, 01:36 AM)fblais Wrote: Is this what’s called a sextoblade?

Yes, the guards are different. You want this one
[Image: mWu9bFQ.jpg]

NOT this one

[Image: J8Sre3t.jpg]

fblais likes this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#10

Member
Quebec, Canada
Thanks!

Dave in KY likes this post
--
Ce message provient du Québec!  Happy2


Users browsing this thread: