#1,311
I have maybe 40 razors. The only razors I've used since December have been the Sailor and the Tiaga Ti. Right now I feel like that trend might continue for the foreseeable future. The heft of the Sailor doesn't bother me, I think it's part of what makes it shave so well.

LOOT, ALI, Calm_Shaver and 3 others like this post
#1,312

Posting Freak
(02-21-2022, 07:29 PM)george1906 Wrote:
(02-21-2022, 05:01 PM)Moriarty Wrote: I don’t know how I would feel about a titanium Sailor. I’m sure I would buy it but I feel like the weight of the current Sailor is essential to the character of the razor. It looks and feels like it should be heavy. Hard to predict whether a sub-100g version would feel right or if it would make it seem more ordinary. I kinda feel like a titanium version should also be stripped back and look like a lightweight - maybe with the same mechanics but a quite different cosmetic design - maybe a skeleton version.


I talk to Murat off and on and he has some ideas for that particular Sailor.  May be a combination of some titanium parts and stainless parts.  We’ll see but I have been surprised by how much I am liking my titanium Taiga.  I had to get used to it at first because I was used to my first gen Taiga and the weight difference is huge!


Sent from my iPhone using Tapatalk

Care should be taken when making razors, or anything for that matter, using different metals that will be in contact particularly if they’re to be used in a wet environment. Galvanic corrosion can happen. 

https://www.sciencedirect.com/topics/mat...-corrosion

https://en.m.wikipedia.org/wiki/Galvanic_corrosion

Mpescado, ALI and LOOT like this post
#1,313
I’ve heard that feedback from quite a few people around the lower end of the range on the Muramasa.  Curious as to whether they will make changes or offer different base plate and top cap options for additional adjustability.

LOOT likes this post
#1,314

Member
Indiana
(This post was last modified: 02-22-2022, 03:17 AM by CK89.)
(02-22-2022, 01:03 AM)Marko Wrote:
(02-21-2022, 07:29 PM)george1906 Wrote:
(02-21-2022, 05:01 PM)Moriarty Wrote: I don’t know how I would feel about a titanium Sailor. I’m sure I would buy it but I feel like the weight of the current Sailor is essential to the character of the razor. It looks and feels like it should be heavy. Hard to predict whether a sub-100g version would feel right or if it would make it seem more ordinary. I kinda feel like a titanium version should also be stripped back and look like a lightweight - maybe with the same mechanics but a quite different cosmetic design - maybe a skeleton version.


I talk to Murat off and on and he has some ideas for that particular Sailor.  May be a combination of some titanium parts and stainless parts.  We’ll see but I have been surprised by how much I am liking my titanium Taiga.  I had to get used to it at first because I was used to my first gen Taiga and the weight difference is huge!


Sent from my iPhone using Tapatalk

Care should be taken when making razors, or anything for that matter, using different metals that will be in contact particularly if they’re to be used in a wet environment. Galvanic corrosion can happen. 

https://www.sciencedirect.com/topics/mat...-corrosion

https://en.m.wikipedia.org/wiki/Galvanic_corrosion

I found some researches show no galvanic corrosion between Ti and SS: https://www.sciencedirect.com/science/ar...3003005801

This is other one: https://www.worldstainless.org/Files/iss...her_EN.pdf
[Image: GG.jpg]

Also he probably will make Ti handle and SS head..

cornbread, ALI, Marko and 2 others like this post
#1,315
[/quote]
Also he probably will make Ti handle and SS head..
[/quote]


That would be an insanely head heavy razor. That will likely be the first one I pass on if that happens.

Deus Vult, cornbread, Dragonsbeard and 1 others like this post
#1,316
Also he probably will make Ti handle and SS head..
[/quote]


That would be an insanely head heavy razor.  That will likely be the first one I pass on if that happens.
[/quote]

My thoughts as well.  I suppose anything is always possible but that sure sounds top heavy to me!

cornbread, AQU and LOOT like this post
#1,317
Also he probably will make Ti handle and SS head..
[/quote]


That would be an insanely head heavy razor. That will likely be the first one I pass on if that happens.
[/quote]


Yeah man, I don’t know if that would work for me either. Wish it was a titanium head and a stainless handle.


Sent from my iPhone using Tapatalk

cornbread and LOOT like this post
#1,318

Member
Indiana
(This post was last modified: 02-22-2022, 04:19 AM by CK89.)
Also he probably will make Ti handle and SS head..
[/quote]


That would be an insanely head heavy razor.  That will likely be the first one I pass on if that happens.
[/quote]


He is always checking weight center. I am sure it is not gonna out of balance. He might make thinner head or longer handle. 

I am thinking he will make Ti handle first, since it is easier than Ti head. 
I guess he probably doesn't have Ti experience, but customers are asking for Ti release.

Artisans who have machine shop are mostly postponing Ti release like Yates, Karve and Charcoal Goods..

Deus Vult, AQU, Calm_Shaver and 2 others like this post
#1,319
Also he probably will make Ti handle and SS head..
[/quote]


That would be an insanely head heavy razor. That will likely be the first one I pass on if that happens.
[/quote]

For sure. The only hope for decent balance is if he reverts to 2020 geometry with the fatter, longer handle.

CK89 likes this post
#1,320

Posting Freak
It looks like stainless steel is a good choice. Here are pictures of why I even thought about that. First from the website, second is a member’s practical experience. Different metals have different galvanic potential so it’s got to be factored in at the design stage. 

[Image: eIrcmOq.jpg][Image: FE6CcAK.jpg]

Calm_Shaver, Cino, Deus Vult and 4 others like this post


Users browsing this thread: 1 Guest(s)