#1,151
(12-23-2021, 10:20 PM)Scaramouche Wrote: Rocnel 2022 I can confirm - hole in the bottom (6.1mm).  It does NOT fit the Taiga stand (post is too wide), and it DOES fit the Rex stand (with some wobble - post is too narrow, but it does stand up). Still in search of a stand, but of course a number of hanging stands would likely work.  The head orientation is the same as the 2021 MC and previous models as discussed, and looks like identical external dimensions as the MC 2021, same Roman numerals for adjustment, and the laser engraving is just a hair lighter.  The brass ring looks remarkably like the gold plate on the MC, but time will tell on wear/tarnish.

[Image: 20211223_120359%5B6198%5D-X2.jpg]

Gorgeous!

Do you know if it weighs more than the MC?

LOOT likes this post
#1,152

Member
Midwest
(12-23-2021, 10:27 PM)Frl2 Wrote:
(12-23-2021, 10:20 PM)Scaramouche Wrote: Rocnel 2022 I can confirm - hole in the bottom (6.1mm).  It does NOT fit the Taiga stand (post is too wide), and it DOES fit the Rex stand (with some wobble - post is too narrow, but it does stand up). Still in search of a stand, but of course a number of hanging stands would likely work.  The head orientation is the same as the 2021 MC and previous models as discussed, and looks like identical external dimensions as the MC 2021, same Roman numerals for adjustment, and the laser engraving is just a hair lighter.  The brass ring looks remarkably like the gold plate on the MC, but time will tell on wear/tarnish.

[Image: 20211223_120359%5B6198%5D-X2.jpg]

Gorgeous!

Do you know if it weighs more than the MC?
Didn't weigh (Santa wrapped it already!), but the adjustment post/dial looks like the same dimensions and appears to be drilled the same.  Adjusting for the weight of the medallion (6.664g Big Grin) on the MC, with the slightly greater thickness of the walls on the 2022 by comparison, I'd guess it's within a hair of the weight of the MC (mine is 142.5g), a heft I've actually come to like.

LOOT and Frl2 like this post
Something wild is loose
#1,153
First shave today with my 2022 Sailor. The top cap was indeed installed incorrectly when shipped. The "Rocnel" and "Sailor" are still supposed to face opposite ways. The adjustment dial seems to be aligned dead on the nose, thank goodness!

I gave it a 3 pass shave on level 2 and it was nice. Definitely a bit more blade feel than my Paradigm 17-4, but pretty efficient. It is quite hefty, which will take some getting used to. It isn't uncomfortably heavy, it just kind of impedes my ability to get a close shave off the bat. I'm sure after a week or two I'll have it dialed in so I can work some areas. Currently, it is unforgiving if I'm angling it slightly too much or pressing a bit due to the weight doing a lot of the work and me not being used to it.

No issues navigating under the nose with the head. It really is a great razor, I'm hopeful that after some time with it my Paradigm 17-4 will be dethroned!

AQU, Frl2, LOOT and 1 others like this post
#1,154

Member
Midwest
(12-23-2021, 10:55 PM)Neil4Real Wrote: First shave today with my 2022 Sailor. The top cap was indeed installed incorrectly when shipped. The "Rocnel" and "Sailor" are still supposed to face opposite ways. The adjustment dial seems to be aligned dead on the nose, thank goodness!

I gave it a 3 pass shave on level 2 and it was nice. Definitely a bit more blade feel than my Paradigm 17-4, but pretty efficient. It is quite hefty, which will take some getting used to. It isn't uncomfortably heavy, it just kind of impedes my ability to get a close shave off the bat. I'm sure after a week or two I'll have it dialed in so I can work some areas. Currently, it is unforgiving if I'm angling it slightly too much or pressing a bit due to the weight doing a lot of the work and me not being used to it.

No issues navigating under the nose with the head. It really is a great razor, I'm hopeful that after some time with it my Paradigm 17-4 will be dethroned!

I've found that the blade matters more in the Rocnel too.  I use a Feather exclusively in my Titanium Taiga - and I wouldn't think of using one in the Rocnel.  With a Personna or an Astra however, it's like a hockey stick on ice (without giving me a Zamboni facial)! Big Grin

Frl2, AQU and LOOT like this post
Something wild is loose
#1,155
(This post was last modified: 12-23-2021, 11:29 PM by Sledge.)
A pic for kicks.
[Image: vuMyujW.jpg]
Merry Christmas!

cornbread, Scaramouche, keto and 2 others like this post
#1,156
(12-23-2021, 10:40 PM)Scaramouche Wrote:
(12-23-2021, 10:27 PM)Frl2 Wrote:
(12-23-2021, 10:20 PM)Scaramouche Wrote: Rocnel 2022 I can confirm - hole in the bottom (6.1mm).  It does NOT fit the Taiga stand (post is too wide), and it DOES fit the Rex stand (with some wobble - post is too narrow, but it does stand up). Still in search of a stand, but of course a number of hanging stands would likely work.  The head orientation is the same as the 2021 MC and previous models as discussed, and looks like identical external dimensions as the MC 2021, same Roman numerals for adjustment, and the laser engraving is just a hair lighter.  The brass ring looks remarkably like the gold plate on the MC, but time will tell on wear/tarnish.

[Image: 20211223_120359%5B6198%5D-X2.jpg]

Gorgeous!

Do you know if it weighs more than the MC?
Didn't weigh (Santa wrapped it already!), but the adjustment post/dial looks like the same dimensions and appears to be drilled the same.  Adjusting for the weight of the medallion (6.664g Big Grin) on the MC, with the slightly greater thickness of the walls on the 2022 by comparison, I'd guess it's within a hair of the weight of the MC (mine is 142.5g), a heft I've actually come to like.

My guess is 139.9 grams for the 2022.

AQU, Scaramouche and LOOT like this post
#1,157

Member
Midwest
(12-23-2021, 11:28 PM)Sledge Wrote: A pic for kicks.
[Image: vuMyujW.jpg]
Merry Christmas!
Nice!  Is that the Maggard MR5 stand?  Still looks like out of stock....  Sad

AQU, Sledge and LOOT like this post
Something wild is loose
#1,158
(12-23-2021, 11:23 PM)Scaramouche Wrote:
(12-23-2021, 10:55 PM)Neil4Real Wrote: First shave today with my 2022 Sailor. The top cap was indeed installed incorrectly when shipped. The "Rocnel" and "Sailor" are still supposed to face opposite ways. The adjustment dial seems to be aligned dead on the nose, thank goodness!

I gave it a 3 pass shave on level 2 and it was nice. Definitely a bit more blade feel than my Paradigm 17-4, but pretty efficient. It is quite hefty, which will take some getting used to. It isn't uncomfortably heavy, it just kind of impedes my ability to get a close shave off the bat. I'm sure after a week or two I'll have it dialed in so I can work some areas. Currently, it is unforgiving if I'm angling it slightly too much or pressing a bit due to the weight doing a lot of the work and me not being used to it.

No issues navigating under the nose with the head. It really is a great razor, I'm hopeful that after some time with it my Paradigm 17-4 will be dethroned!

I've found that the blade matters more in the Rocnel too.  I use a Feather exclusively in my Titanium Taiga - and I wouldn't think of using one in the Rocnel.  With a Personna or an Astra however, it's like a hockey stick on ice (without giving me a Zamboni facial)! Big Grin

That's right, don't be afraid to dial up or dial down to suit your face, it is an adjustable after all.

I feel with an Astra SP, it is one of the safest and smoothest combos out there.

LOOT and Scaramouche like this post
#1,159
(This post was last modified: 12-24-2021, 02:21 AM by Sledge.)
(12-23-2021, 11:48 PM)Scaramouche Wrote:
(12-23-2021, 11:28 PM)Sledge Wrote: A pic for kicks.
[Image: vuMyujW.jpg]
Merry Christmas!
Nice!  Is that the Maggard MR5 stand?  Still looks like out of stock....  Sad

Yes it is.  Perfect fit for the 2020, not sure about the other models though. Check out Marley Machine Works on Etsy, he makes custom stands.

Frl2, Scaramouche and LOOT like this post
#1,160

Member
Midwest
(This post was last modified: 12-24-2021, 04:48 AM by Scaramouche.)
(12-24-2021, 02:11 AM)Sledge Wrote:
(12-23-2021, 11:48 PM)Scaramouche Wrote:
(12-23-2021, 11:28 PM)Sledge Wrote: A pic for kicks.
[Image: vuMyujW.jpg]
Merry Christmas!
Nice!  Is that the Maggard MR5 stand?  Still looks like out of stock....  Sad

Yes it is.  Perfect fit for the 2020, not sure about the other models though.  Check out Marley Machine Works on Etsy, he makes custom stands.
Thanks!  Sent a message to Scott at MMW with photos of the OEM stand and measurements to see if he could fabricate one - here's hoping!

***Scott says can do - woo-hoo!  Tongue

LOOT, Sledge and Frl2 like this post
Something wild is loose


Users browsing this thread: 2 Guest(s)