(This post was last modified: 12-02-2021, 06:28 AM by Sledge.)
(12-02-2021, 05:08 AM)Scaramouche Wrote:That is going to be a tight fit. .06 mm/2 is .03 mm on all sides of the handle base if centered. May fit like a glove. Curious to see how it works out.(12-02-2021, 03:53 AM)Sledge Wrote:Advertised ID of the Maggard stand is 15.35 mm. Digital caliper measured diameter of the MC dial is 15.29 mm, so based on that it should fit. Will order when they come back in stock and give it a try - one concern was the protruding dissasembly knob, but looks like the stand is shallow enough that it will miss both the gold ring and the knob. We shall see....(12-02-2021, 02:45 AM)Scaramouche Wrote: This is what the MC 2021 looks like in the RazoRock variable - adjustment knob is 15.29 mm diameter, gold ring is 14.85 mm. The razor can be straightened but obviously there is over 0.3 mm clearance on either side of the adjustment knob, so some "lean" is possible. It works though, and is heavy enough to prevent tipping over, but the most elegant solution is Murat's own stand, custom-fit to the wider adjustment knob. The 15.35 mm M5 Maggard stand (currently out of stock) should be snug enough to fit the adjustment knob without scuffing the gold ring (0.03 mm clearance on either side), so should be ideal absent Murat's made-for stand (and I'm not sure he even sells them separately). Thanks for the lineup!
After trying them all for awhile the only suitable stand in my lineup is the Maggard. The others can touch the gold ring unless I add a spacer in the bottom. Looks like from your pics the handle is wider on yours than on my 2020 since mine sits down farther and snugly into the second interior socket on the RazoRock. Since mine fits tight in the Maggard stand I don't see how your MC will since the handle base appears to be bigger than mine.