#511

Member
Nashville, TN
SharpSpine Are you saying that smile is a good thing? This is all confusing to me. It seems that the blade should be straight, yet I get great shaves with the GEM blades that have the smile.

If I understood what you were communicating, and what you said is correct, then this may be a design change rather than a defect
#512

Administrator
Philadelphia, PA
(09-06-2016, 12:25 AM)Pete123 Wrote: SharpSpine   Are you saying that smile is a good thing?  This is all confusing to me.  It seems that the blade should be straight, yet I get great shaves with the GEM blades that have the smile.

If I understood what you were communicating, and what you said is correct, then this may be a design change rather than a defect

I just can't see how a blade smile would result in a better shave than a straight blade.
Tu ne cede malis, sed contra audentior ito.
#513
(09-06-2016, 12:25 AM)Pete123 Wrote: SharpSpine Are you saying that smile is a good thing? This is all confusing to me. It seems that the blade should be straight, yet I get great shaves with the GEM blades that have the smile.

If I understood what you were communicating, and what you said is correct, then this may be a design change rather than a defect


I posted earlier a quote from their website stating to them the perfect gap is .65mm. This wouldn't be a new design - this is a flaw.


Sent from my iPhone using Tapatalk
#514
(09-06-2016, 12:31 AM)andrewjs18 Wrote:
(09-06-2016, 12:25 AM)Pete123 Wrote: SharpSpine   Are you saying that smile is a good thing?  This is all confusing to me.  It seems that the blade should be straight, yet I get great shaves with the GEM blades that have the smile.

If I understood what you were communicating, and what you said is correct, then this may be a design change rather than a defect

I just can't see how a blade smile would result in a better shave than a straight blade.


Especially when it makes the gap much smaller, which makes a more mild razor. It already seems mild to me, and with the smiling blade I had to make 4 passes just to achieve a DFS. With my ATT SE1 I can get the same with one pass and touch ups.


Sent from my iPhone using Tapatalk
#515

Administrator
Philadelphia, PA
(09-06-2016, 12:40 AM)RSP1 Wrote:
(09-06-2016, 12:31 AM)andrewjs18 Wrote:
(09-06-2016, 12:25 AM)Pete123 Wrote: SharpSpine   Are you saying that smile is a good thing?  This is all confusing to me.  It seems that the blade should be straight, yet I get great shaves with the GEM blades that have the smile.

If I understood what you were communicating, and what you said is correct, then this may be a design change rather than a defect

I just can't see how a blade smile would result in a better shave than a straight blade.


Especially when it makes the gap much smaller, which makes a more mild razor. It already seems mild to me, and with the smiling blade I had to make 4 passes just to achieve a DFS. With my ATT SE1 I can get the same with one pass and touch ups.


Sent from my iPhone using Tapatalk

agreed. definitely let us know how you make out! tell them that it's being talked about on the forum and that another person (me) is also having the same problem to a worse degree (mine seems to smile more than yours) from a similar production batch.
Tu ne cede malis, sed contra audentior ito.
#516

Posting Freak
Canada
(This post was last modified: 09-06-2016, 12:55 AM by celestino.)
I had the same thing that Brian (sharpspine) shows in his phots with the Oneblade that I ordered, smile with GEM blades, no smile with Feather blades.

Nonetheless, I still didn't get the shaves I was looking for even when using the latter blades, unfortunately.
I am not sure what it was, but I am not overly concerned as I won't be ordering another.
I am extremely content with the DE razors that I have. Shy

Good luck, gentlemen.

bakerbarber likes this post
Celestino
Love, Laughter & Shaving  Heart
#517
I agree that a smile in which the blade gap is severely reduced in the middle would not be good. I also agree that when OneBlade touts their high level of tolerances and specifies a specific blade gap that they don't intend for there to be a differing in gap along the length of the blade, even if it does happen to make the blade perform better in general.

Pete123, I have a long standing theory/belief that the more rigid a blade is, then the more efficient it can be at cutting hair. DE blades never worked great for me due to blade chatter; the blade would flex against my stubble leading to many weepers. Most razors flex a DE blade in one plane. Slant razors will flex them in multiple planes, thus increasing the blades apparent rigidity. Slant razors gave me the best shaves I ever got from DE blades, but they were nowhere near as nice as a good old SE blade.

Therefore, if this theory holds true then I would suspect that a sight flex in a SE blade which normally lays completely flat would do the same type of thing as a slant razor does by increasing the blade's apparent rigidity. In my experience, the higher the blade stiffness the better the shave.

Pete123 likes this post
>>> Brian <<<
Happy beeps, buddy! Happy beeps!
#518

Administrator
Philadelphia, PA
mine has the serial number 7347.
Tu ne cede malis, sed contra audentior ito.
#519

Member
Las Vegas, NV, USA
(09-05-2016, 10:03 PM)RSP1 Wrote: 7727 is mine - just checked

(09-06-2016, 07:12 AM)andrewjs18 Wrote: mine has the serial number 7347.

It’s interesting that your serial numbers are so far apart. I know andrewjs18 just got his, but isn’t yours RSP1 also a fairly recent acquisition? (Of course the razors could have just been pulled out from opposite ends of the same batch.)

I was thinking about placing an order myself, but reading these latest developments has put a dampener on my plans. Awaiting with curiosity what OneBlade’s response to your very valid concerns will be. I hope it all works out.
Whenever I go to shave, I assume there’s someone else on the planet shaving, so I say “I’m gonna go shave, too.”
– Mitch Hedberg
#520

Administrator
Philadelphia, PA
(09-06-2016, 07:33 AM)Matsilainen Wrote:
(09-05-2016, 10:03 PM)RSP1 Wrote: 7727 is mine - just checked

(09-06-2016, 07:12 AM)andrewjs18 Wrote: mine has the serial number 7347.

It’s interesting that your serial numbers are so far apart. I know andrewjs18 just got his, but isn’t yours RSP1 also a fairly recent acquisition? (Of course the razors could have just been pulled out from opposite ends of the same batch.)

I was thinking about placing an order myself, but reading these latest developments has put a dampener on my plans. Awaiting with curiosity what OneBlade’s response to your very valid concerns will be. I hope it all works out.

I hope it gets worked out as well. I want to try a GEM in the razor but I want to do it after I know a feather is aligned properly.

Matsilainen likes this post
Tu ne cede malis, sed contra audentior ito.


Users browsing this thread: 1 Guest(s)