#21

<3
Moscow
Recently, I bought a Vector and its topcap is slightly bent, so the edges of topcap do not press blade tightly. Can I fix this somehow? If I bend topcap with my hands, will it be safe?
#22
(06-14-2019, 12:22 PM)Wmaster Wrote: Recently, I bought a Vector and its topcap is slightly bent, so the edges of topcap do not press blade tightly. Can I fix this somehow? If I bend topcap with my hands, will it be safe?

All you can do is try. If you have a vise sometimes you can place objects in the vise along with the bent piece, and apply pressure by closing the vise slowly. Arrange the objects so that the pressure moves the top cap in the desired direction to correct the bend. I've done this with tattoo machines that were bent and successfully straightened them. Good luck with it.

Of course if the razor was purchased new, and came to you bent, an return and refund or exchange would be in order.
#23

Merchant
San Diego CA
(06-14-2019, 12:22 PM)Wmaster Wrote: Recently, I bought a Vector and its topcap is slightly bent, so the edges of topcap do not press blade tightly. Can I fix this somehow? If I bend topcap with my hands, will it be safe?

There was another secondhand owner who had this happen. You can safely and easily straighten it by hand. Make small adjustments and check your progress often. If you need additional advice shoot me an email. shane@blacklandrazors.com

HighSpeed likes this post
#24

<3
Moscow
(06-14-2019, 03:29 PM)Blackland Razors Wrote:
(06-14-2019, 12:22 PM)Wmaster Wrote: Recently, I bought a Vector and its topcap is slightly bent, so the edges of topcap do not press blade tightly. Can I fix this somehow? If I bend topcap with my hands, will it be safe?

There was another secondhand owner who had this happen. You can safely and easily straighten it by hand. Make small adjustments and check your progress often. If you need additional advice shoot me an email. shane@blacklandrazors.com
I answered you on email
#25

<3
Moscow
Already a month I can not get an answer from you. Great support! Big Grin
#26

Merchant
San Diego CA
(07-14-2019, 11:18 AM)Wmaster Wrote: Already a month I can not get an answer from you. Great support! Big Grin

Hmm. I’m not showing any unread emails. Try again or shoot me a PM. Thanks!
#27
When are you going to make more vectors?


Sent from my iPhone using Tapatalk
#28

Merchant
San Diego CA
(07-30-2019, 05:22 AM)J.mckenna Wrote: When are you going to make more vectors?


Sent from my iPhone using Tapatalk

They are in production now. I should have them back in stock within a month or two. A more precise timeline will be offered as production progresses.
#29
(07-30-2019, 06:23 PM)Blackland Razors Wrote:
(07-30-2019, 05:22 AM)J.mckenna Wrote: When are you going to make more vectors?


Sent from my iPhone using Tapatalk

They are in production now. I should have them back in stock within a month or two. A more precise timeline will be offered as production progresses.


Are you going to roll out bronze Vectors as well in the next batch?


Sent from my iPhone using Tapatalk
#30

Merchant
San Diego CA
(07-31-2019, 06:37 PM)jags009 Wrote:
(07-30-2019, 06:23 PM)Blackland Razors Wrote:
(07-30-2019, 05:22 AM)J.mckenna Wrote: When are you going to make more vectors?


Sent from my iPhone using Tapatalk

They are in production now. I should have them back in stock within a month or two. A more precise timeline will be offered as production progresses.


Are you going to roll out bronze Vectors as well in the next batch?


Sent from my iPhone using Tapatalk

No. This production run is all stainless.


Users browsing this thread: 1 Guest(s)