#2,581

Member
gone to Carolina in my mind
Kudos Eric! I expect many of us will be counting down with you. -- Stay safe and warm, and enjoy some well earned R&R.

MaineYooper, TommyCarioca and mrdoug like this post
Technique Trumps Tools
Skin Care Trumps Skin Repair

Be Cool, be Kind, and be Well
--  Mike --
#2,582

Scentsless Shaver
Oakland, ME
Many thanks to Paul mrdoug for a new to me blade to try, the Dorco Prime. I put the new blade in the Karve Bison and had a great shave. The blade is smooth and very sharp! I had 2 red spots on my chin due to me getting lulled into inattentiveness. Nothing the styptic pencil stub could not handle. And I can't get over how smooth my face feels! Thanks again, Paul!

mrdoug and Dave in KY like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,583

Member
New York
(04-07-2024, 06:28 PM)MaineYooper Wrote: Many thanks to Paul mrdoug for a new to me blade to try, the Dorco Prime. I put the new blade in the Karve Bison and had a great shave. The blade is smooth and very sharp! I had 2 red spots on my chin due to me getting lulled into inattentiveness. Nothing the styptic pencil stub could not handle. And I can't get over how smooth my face feels! Thanks again, Paul!
I'm very glad it worked so well for you. It seems you may have had a similar experience to mine. I found them a bit sharper than the best personas, but still just as smooth. They've pretty much secured a spot as my top blade... Especially considering the price. You can usually pick them up for around $10 for $100. In comparison, the Comfort coated are around 15 and the German Platinum are $20? So a good savings to boot!

I can't speak to longevity, as I only use a blade either once or twice before pitching it. However, fwiw, this one is a 2 shave type of blade.

Hope it continues to impress. I'm off for my afternoon shave with the same.

Have a great rest of your weekend!

MaineYooper and Dave in KY like this post
#2,584

Member
Chester County, PA
(This post was last modified: 04-07-2024, 07:59 PM by dtownvino.)
Top or bottom if I may ask - or are they the same thing ? I also saw red box platinums.

[Image: hUq6ylN.jpeg]
#2,585

Member
New York
(This post was last modified: 04-07-2024, 08:22 PM by mrdoug.)
(04-07-2024, 07:57 PM)dtownvino Wrote: Top or bottom if I may ask - or are they the same thing ? I also saw red box platinums.

[Image: hUq6ylN.jpeg]
Well, The bottom one is supposed to be a thousand blades. So, roughly $30 savings. Unfortunately, when I ordered one there was an error in their system. Long story short, Amazon was sending a hundred blades (The top picture) for $70. In discussing it with one of the representatives, they pointed out the error in their system and told me they didn't feel confident I'd ever get the right box. So, I just ordered a few hundred.

The red ones are not Prime blades. From what I hear they're pretty good, but not to the level of the prime. Also, they make a Titan blade. I have a Sample pack of those. They're very smooth, but I didn't feel I got really close shave from them. At least, not in comparison to the primes. Finally, they seem to have come out with a super sharp version of their blades. I could only find it in five packs in the US. My guess is the hundred packs just haven't reached the US quite yet. I do have a sample pack of those, but have not yet tried them.

Dave in KY, dtownvino and MaineYooper like this post
#2,586

Scentsless Shaver
Oakland, ME
(04-07-2024, 07:57 PM)dtownvino Wrote: Top or bottom if I may ask - or are they the same thing ? I also saw red box platinums.

[Image: hUq6ylN.jpeg]

(04-07-2024, 08:17 PM)mrdoug Wrote:
(04-07-2024, 07:57 PM)dtownvino Wrote: Top or bottom if I may ask - or are they the same thing ? I also saw red box platinums.

[Image: hUq6ylN.jpeg]
Well, The bottom one is supposed to be a thousand blades. So, roughly $30 savings. Unfortunately, when I ordered one there was an error in their system. Long story short, Amazon was sending a hundred blades (The top picture) for $70. In discussing it with one of the representatives, they pointed out the error in their system and told me they didn't feel confident I'd ever get the right box. So, I just ordered a few hundred.

The red ones are not Prime blades. From what I hear they're pretty good, but not to the level of the prime. Also, they make a Titan blade. I have a Sample pack of those. They're very smooth, but I didn't feel I got really close shave from them. At least, not in comparison to the primes. Finally, they seem to have come out with a super sharp version of their blades. I could only find it in five packs in the US. My guess is the hundred packs just haven't reached the US quite yet. I do have a sample pack of those, but have not yet tried them.

Well now I'm tempted to get another bundle o' blades!

dtownvino and mrdoug like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,587

Scentsless Shaver
Oakland, ME
As my high school math teacher would say, today is a Heinz day...to catch up!

I have been working through my tub of Sheep and while I will get another tub someday, I am anxious to be using a different soap! But the ring around the tub is getting smaller while the hole in the center enlarges. Will it make it to next Sunday? Who knows!

Why next Sunday? Well, today was my 993rd consecutive shave, so next Sunday will be a milestone for me. I am thinking a Holiday should be declared and we should all have the day off with pay!! But somehow our rich uncle in DC probably won't go for that. So off to work I'll go, being That Guy as my aftershave will have very smug overtones, I am sure! (I imagine that in 2 weeks when Dave hits his 2000th shave, folks might pass out from the awesomeness of the achievement!!  Happy

Yesterday I reset a knot to bring the loft up to around 55mm. I was enjoying it set with no washers, but was finding it too scrubby/stubby. Nice thing about setting with silicone is that one can do these things easily enough. So the Trotter Quasar now has the AP Independent UHD knot set at about 55mm instead of 50mm.

Today I am going to my former work partner's retirement dinner. After 29 years, she is done. Between the Pandemic and issues from on high, she is, as the younger crowd says, so over it! She is 2 years older than me, but I have been content to stay Staff (the bottom rung on the old Rite Aid job ladder) while being a manager or more adds more levels of frustration, interference, and the compensation hardly makes up for the fecal matter you have to deal with (all my opinions, not hers, and not meant to reflect on anyone but myself). It'll just be us who worked with her, pharmacists, techs, and spouses. Sure there'll be some shop talk, but we'll also be humans, too!!

Dave in KY, HighSpeed, ewk and 2 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,588
Thanks for the declared holiday! Do I get paid time and a half if I shave that day? Congratulations on nearly reaching a milestone, and on earning the contentment of being satisfied with the your work.

MaineYooper, Dave in KY and HighSpeed like this post
#2,589

Just Here for the Shaves
Williamsburg, KY
(04-14-2024, 07:04 PM)MaineYooper Wrote: As my high school math teacher would say, today is a Heinz day...to catch up!

I have been working through my tub of Sheep and while I will get another tub someday, I am anxious to be using a different soap! But the ring around the tub is getting smaller while the hole in the center enlarges. Will it make it to next Sunday? Who knows!

Why next Sunday? Well, today was my 993rd consecutive shave, so next Sunday will be a milestone for me. I am thinking a Holiday should be declared and we should all have the day off with pay!! But somehow our rich uncle in DC probably won't go for that. So off to work I'll go, being That Guy as my aftershave will have very smug overtones, I am sure! (I imagine that in 2 weeks when Dave hits his 2000th shave, folks might pass out from the awesomeness of the achievement!!  Happy

Yesterday I reset a knot to bring the loft up to around 55mm. I was enjoying it set with no washers, but was finding it too scrubby/stubby. Nice thing about setting with silicone is that one can do these things easily enough. So the Trotter Quasar now has the AP Independent UHD knot set at about 55mm instead of 50mm.

Today I am going to my former work partner's retirement dinner. After 29 years, she is done. Between the Pandemic and issues from on high, she is, as the younger crowd says, so over it! She is 2 years older than me, but I have been content to stay Staff (the bottom rung on the old Rite Aid job ladder) while being a manager or more adds more levels of frustration, interference, and the compensation hardly makes up for the fecal matter you have to deal with (all my opinions, not hers, and not meant to reflect on anyone but myself). It'll just be us who worked with her, pharmacists, techs, and spouses. Sure there'll be some shop talk, but we'll also be humans, too!!

Can't wait for you to blow past that milestone after hitting Eric, Well Done !

ewk, dtownvino, HighSpeed and 1 others like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#2,590

Member
gone to Carolina in my mind
(This post was last modified: 04-15-2024, 03:58 AM by HighSpeed.)
(04-14-2024, 11:14 PM)Dave in KY Wrote:
(04-14-2024, 07:04 PM)MaineYooper Wrote: As my high school math teacher would say, today is a Heinz day...to catch up!

I have been working through my tub of Sheep and while I will get another tub someday, I am anxious to be using a different soap! But the ring around the tub is getting smaller while the hole in the center enlarges. Will it make it to next Sunday? Who knows!

Why next Sunday? Well, today was my 993rd consecutive shave, so next Sunday will be a milestone for me. I am thinking a Holiday should be declared and we should all have the day off with pay!! But somehow our rich uncle in DC probably won't go for that. So off to work I'll go, being That Guy as my aftershave will have very smug overtones, I am sure! (I imagine that in 2 weeks when Dave hits his 2000th shave, folks might pass out from the awesomeness of the achievement!!  Happy

Yesterday I reset a knot to bring the loft up to around 55mm. I was enjoying it set with no washers, but was finding it too scrubby/stubby. Nice thing about setting with silicone is that one can do these things easily enough. So the Trotter Quasar now has the AP Independent UHD knot set at about 55mm instead of 50mm.

Today I am going to my former work partner's retirement dinner. After 29 years, she is done. Between the Pandemic and issues from on high, she is, as the younger crowd says, so over it! She is 2 years older than me, but I have been content to stay Staff (the bottom rung on the old Rite Aid job ladder) while being a manager or more adds more levels of frustration, interference, and the compensation hardly makes up for the fecal matter you have to deal with (all my opinions, not hers, and not meant to reflect on anyone but myself). It'll just be us who worked with her, pharmacists, techs, and spouses. Sure there'll be some shop talk, but we'll also be humans, too!!

Can't wait for you to blow past that milestone after hitting Eric, Well Done !
FWIW I've been watching both of your shave counts, and I'm rooting for both of you.  I doubt I'm the only one.  And Eric, thanks for another slice of the MaineYooper's life.  You seem to have worked out that real success is you being you.  Maybe it's contagious.  At any rate, it seems to be going around.  Take care of your loved ones, and leave all the fecal matter you can for someone else.

Dave in KY, mrdoug, swellcat and 1 others like this post
Technique Trumps Tools
Skin Care Trumps Skin Repair

Be Cool, be Kind, and be Well
--  Mike --


Users browsing this thread: