#1,891

Scentsless Shaver
Oakland, ME
[Image: pde2HGt.jpg]

SEptember kick off with a new razor, the GEM Black & Gold push button (Thanks again, Paul D!) It held a new Personna PTFE blade and did a good job this morning. More on that later. 
Also new was the HCS Star/Kambro handle with a new G5A knot (AlanH81 thanks so much!)
Soap was the 1508.5 contender Black Tie #13.

The shave went well, and the razor seemed to have more blade feel than I expected. I thought these push buttons were the precursor to the Contours, known be on the mild side. The shave was close but I did give myself some weepers/nicks on my chin. It could just be user error with a new tool, a new blade (some of my GEMs shave a bit more aggressive on first use of a new blade, some don't, and it could be me again!), or this razor may not be the pussy cat I assumed it was. All that to say, I am glad to have this one and it will see use later as the blade is broken in. Tomorrow I plan to use the newly replated Damaskeene with that blade at least once and then I will revisit the Black & Gold.

AlanH81, Fluffy, Dave in KY and 4 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#1,892

Just Here for the Shaves
Williamsburg, KY
Great start to SEptember Eric. That brush is drop dead gorgeous !

HighSpeed and mrdoug like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#1,893

Scentsless Shaver
Oakland, ME
(09-01-2022, 05:43 PM)Dave in KY Wrote: Great start to SEptember Eric. That brush is drop dead gorgeous !

Thanks, Dave. The handle will take some getting used to, being longer than all others except the JR#431. But I agree, it looks stunning!

Dave in KY and HighSpeed like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#1,894

Member
gone to Carolina in my mind
(09-01-2022, 05:00 PM)MaineYooper Wrote: [Image: pde2HGt.jpg]

SEptember kick off with a new razor, the GEM Black & Gold push button (Thanks again, Paul D!) It held a new Personna PTFE blade and did a good job this morning. More on that later. 
Also new was the HCS Star/Kambro handle with a new G5A knot (AlanH81 thanks so much!)
Soap was the 1508.5 contender Black Tie #13.

The shave went well, and the razor seemed to have more blade feel than I expected. I thought these push buttons were the precursor to the Contours, known be on the mild side. The shave was close but I did give myself some weepers/nicks on my chin. It could just be user error with a new tool, a new blade (some of my GEMs shave a bit more aggressive on first use of a new blade, some don't, and it could be me again!), or this razor may not be the pussy cat I assumed it was. All that to say, I am glad to have this one and it will see use later as the blade is broken in. Tomorrow I plan to use the newly replated Damaskeene with that blade at least once and then I will revisit the Black & Gold.
I have heard from people who know better than me that first-use GEMS can be on the rough side.  Also ...


(09-01-2022, 05:43 PM)Dave in KY Wrote: Great start to SEptember Eric. That brush is drop dead gorgeous !
I agree with Dave.  That is a great shave and a great brush.  The handle looks like it's got the AlanH81 shine.  Happy2  Happy2

MilkCrate, mrdoug, AlanH81 and 1 others like this post
Technique Trumps Tools
Skin Care Trumps Skin Repair

Be Cool, be Kind, and be Well
--  Mike --
#1,895

Member
Gatineau, QC, Canada
(09-01-2022, 08:43 PM)HighSpeed Wrote:
(09-01-2022, 05:00 PM)MaineYooper Wrote: [Image: pde2HGt.jpg]

SEptember kick off with a new razor, the GEM Black & Gold push button (Thanks again, Paul D!) It held a new Personna PTFE blade and did a good job this morning. More on that later. 
Also new was the HCS Star/Kambro handle with a new G5A knot (AlanH81 thanks so much!)
Soap was the 1508.5 contender Black Tie #13.

The shave went well, and the razor seemed to have more blade feel than I expected. I thought these push buttons were the precursor to the Contours, known be on the mild side. The shave was close but I did give myself some weepers/nicks on my chin. It could just be user error with a new tool, a new blade (some of my GEMs shave a bit more aggressive on first use of a new blade, some don't, and it could be me again!), or this razor may not be the pussy cat I assumed it was. All that to say, I am glad to have this one and it will see use later as the blade is broken in. Tomorrow I plan to use the newly replated Damaskeene with that blade at least once and then I will revisit the Black & Gold.
I have heard from people who know better than me that first-use GEMS can be on the rough side.  Also ...


(09-01-2022, 05:43 PM)Dave in KY Wrote: Great start to SEptember Eric. That brush is drop dead gorgeous !
I agree with Dave.  That is a great shave and a great brush.  The handle looks like it's got the AlanH81 shine.  Happy2  Happy2
It’s polyuretaned professionally I spent hours on it to bring that shine up while it’s got nice smooth glazed Finish.. Happy2 

I like smaller handles and that’s why I sold it other wise it’s a perfect handle truly worth owning one!

Best Regards


Alan H

MaineYooper, mrdoug, Dave in KY and 2 others like this post
"Strive not to be a success, but rather to be of value."

  - Albert Einstein
#1,896

Just Here for the Shaves
Williamsburg, KY
(This post was last modified: 09-01-2022, 09:06 PM by Dave in KY.)
(09-01-2022, 08:50 PM)AlanH81 Wrote:
(09-01-2022, 08:43 PM)HighSpeed Wrote:
(09-01-2022, 05:00 PM)MaineYooper Wrote: [Image: pde2HGt.jpg]

SEptember kick off with a new razor, the GEM Black & Gold push button (Thanks again, Paul D!) It held a new Personna PTFE blade and did a good job this morning. More on that later. 
Also new was the HCS Star/Kambro handle with a new G5A knot (AlanH81 thanks so much!)
Soap was the 1508.5 contender Black Tie #13.

The shave went well, and the razor seemed to have more blade feel than I expected. I thought these push buttons were the precursor to the Contours, known be on the mild side. The shave was close but I did give myself some weepers/nicks on my chin. It could just be user error with a new tool, a new blade (some of my GEMs shave a bit more aggressive on first use of a new blade, some don't, and it could be me again!), or this razor may not be the pussy cat I assumed it was. All that to say, I am glad to have this one and it will see use later as the blade is broken in. Tomorrow I plan to use the newly replated Damaskeene with that blade at least once and then I will revisit the Black & Gold.
I have heard from people who know better than me that first-use GEMS can be on the rough side.  Also ...


(09-01-2022, 05:43 PM)Dave in KY Wrote: Great start to SEptember Eric. That brush is drop dead gorgeous !
I agree with Dave.  That is a great shave and a great brush.  The handle looks like it's got the AlanH81 shine.  Happy2  Happy2
It’s polyuretaned professionally I spent hours on it to bring that shine up while it’s got nice smooth glazed Finish.. Happy2 

I like smaller handles and that’s why I sold it other wise it’s a perfect handle truly worth owning one!

Best Regards


Alan H

I was weakening Alan but have too many brushes. I almost pulled the trigger multiple times. If Eric sells it down the road I will be waiting Big Grin

MaineYooper, mrdoug and HighSpeed like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#1,897

Member
New York
(09-01-2022, 08:50 PM)AlanH81 Wrote:
(09-01-2022, 08:43 PM)HighSpeed Wrote:
(09-01-2022, 05:00 PM)MaineYooper Wrote: [Image: pde2HGt.jpg]

SEptember kick off with a new razor, the GEM Black & Gold push button (Thanks again, Paul D!) It held a new Personna PTFE blade and did a good job this morning. More on that later. 
Also new was the HCS Star/Kambro handle with a new G5A knot (AlanH81 thanks so much!)
Soap was the 1508.5 contender Black Tie #13.

The shave went well, and the razor seemed to have more blade feel than I expected. I thought these push buttons were the precursor to the Contours, known be on the mild side. The shave was close but I did give myself some weepers/nicks on my chin. It could just be user error with a new tool, a new blade (some of my GEMs shave a bit more aggressive on first use of a new blade, some don't, and it could be me again!), or this razor may not be the pussy cat I assumed it was. All that to say, I am glad to have this one and it will see use later as the blade is broken in. Tomorrow I plan to use the newly replated Damaskeene with that blade at least once and then I will revisit the Black & Gold.
I have heard from people who know better than me that first-use GEMS can be on the rough side.  Also ...


(09-01-2022, 05:43 PM)Dave in KY Wrote: Great start to SEptember Eric. That brush is drop dead gorgeous !
I agree with Dave.  That is a great shave and a great brush.  The handle looks like it's got the AlanH81 shine.  Happy2  Happy2
It’s polyuretaned professionally I spent hours on it to bring that shine up while it’s got nice smooth glazed Finish.. Happy2 

I like smaller handles and that’s why I sold it other wise it’s a perfect handle truly worth owning one!

Best Regards


Alan H
As usual, your work is amazing Alan.

Sent from my Pixel 4a using Tapatalk

Dave in KY, HighSpeed, MaineYooper and 2 others like this post
#1,898

Scentsless Shaver
Oakland, ME
[Image: 12kZrdJ.jpg]

Contrary to appearances, I don't bowl lather. I like this scuttle as a brush warmer. I think it works better for me than the ceramic one made for this purpose! 

The Damaskeene performed flawlessly. However, I had a bit of tingling on my neck, and right cheek. Blade? Me? Whatever the reason, it was gone after balm was applied. This was use 2 of the GEM blade. Paul mrdoug I think I feel your pain! Let's hope this goes better tomorrow. I plan to use another gentle GEM, the Clog Pruf Peerless.

mrdoug, ewk, HighSpeed and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#1,899

Scentsless Shaver
Oakland, ME
[Image: kkSVUoR.jpg]

Today's cutting tool was courtesy of Kim Phoenixkh  who graciously has lent me his back up (hey, don't judge, it's a real thing here!) Claymore Evolution for this month's festivities. It is very efficient and smooth, with a little more blade feel (I think) than the Hawk v3. My face has irritated by a new GEM blade and/or rosacea, so I need to try again with the Claymore. And I want to compare to my Vector, which in SS was too much for me but in titanium is perfect!
Blade: Feather Professional (5)
Brush: APSCo 2BED in Trotter Handcrafts Messier
Soap: Black Tie #13
Balm: Stirling unscented lotion balm
9/10 (due to my face which is hurting me and killing you!)

ewk, HighSpeed, mrdoug and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#1,900

Scentsless Shaver
Oakland, ME
After some irritation these last few days, I decided to focus on a gentler yet close shaves, and I chose the Schick Type M adjustable set on 5 for most of the shave. I dialed down for the ATG to 4. Not really sure how many shaves are on the sChick blade. But it was exactly what I needed today!
Mystic Water Sensitive Skin and the Star/Kambro G5A completed the lineup.

MilkCrate, keto, mrdoug and 3 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!


Users browsing this thread: 1 Guest(s)