2021/22 Rocnel Sailor Adjustable

So I have received today my used Rocnel Sailor Master Collection. It is a 2021 Version as it is a two piece razor. But it has the 2022 engraving. So I think it has been produced in 2022. 

One thing that is not amusing is that the piece with the serial number keeps falling out of the handle. I don’t think that it’s supposed to be like this. 

Has anyone else experienced the same thing. See picture:



Regards

Spectre

whoever sold you this razor, kept this information from you...the loose plug that keeps falling out.

its easy to remedy...get yourself some Loctite 480 ....it looks dark brown.

wash and dry both areas thoroughly ...take a little smidge on a toothpick and smear on the inner walls of the chamber and base of the chamber
inside the handle.

Less is more...then attach the plug and leave overnight to dry...good as new

Tester28
Thank you very much for your help.

With a PN from another user I have also found on page 107 that it might happen.

I will try on the weekend. The loctite is ordered

So I have received today my used Rocnel Sailor Master Collection. It is a 2021 Version as it is a two piece razor. But it has the 2022 engraving. So I think it has been produced in 2022. 

One thing that is not amusing is that the piece with the serial number keeps falling out of the handle. I don’t think that it’s supposed to be like this. 

Has anyone else experienced the same thing. See picture:



Regards

Spectre

whoever sold you this razor, kept this information from you...the loose plug that keeps falling out.

its easy to remedy...get yourself some Loctite 480 ....it looks dark brown.

wash and dry both areas thoroughly ...take a little smidge on a toothpick and smear on the inner walls of the chamber and base of the chamber
inside the handle.

Less is more...then attach the plug and leave overnight to dry...good as new

Tester28
Thank you very much for your help.

With a PN from another user I have also found on page 107 that it might happen.

I will try on the weekend. The loctite is ordered

The Lotite 480 came yesterday. I had cleaned the insert and the handle thoroughly. And let it dry since the last post. 

This morning I cleaned everything up with a microfiber cloth and then applied the loctite into the chamber and the base of the chamber with the toothpick. This went pretty well and did help to not apply to much of the glue. 

I pop the insert into the chamber. That was little tricky  as the insert was pushed out by air pressure? Again slightly out out the chamber. Applying a little pressure und keeping it pressed to the base of the chamber helped. I have aligned the serial being parallel to the dot of the scale being selected as level. 

Now I let it dry until first ever use of it. I look forward to it. 

Thank you all for your help!

One thing I can say right now is that the Titan Series Hybrid 2023 and the Sailor Master Collection 2021 have the same balancing point. I though, that the hybrid would be more tending to the head but they are the same balanced. 

That is impressing.

2022 L   Fantastic 3 pass Sail on level II

I bet thats a nice adjustable. The head design seems like it might be too thick, for me.

Ti

Ti

How does the Ti compare to the SS version, to you?

Ti

How does the Ti compare to the SS version, to you?

Was debut shave -significantly more nimble as expected.  Exhibits all the good Sailor feels and qualities without the added weight.  Will need more time to know better but very impressed.

Ti

How does the Ti compare to the SS version, to you?

Was debut shave -significantly more nimble as expected.  Exhibits all the good Sailor feels and qualities without the added weight.  Will need more time to know better but very impressed.

  Will look forward to later thoughts.

Ti

Woohooo! Congrats on the acquisition. That razor is hard to put down.

You in the 2-3 setting range most of the time?

I've dialed mine back a good bit. 4 is plenty to remove even thick growth.

Sent from my SM-S928U using Tapatalk