#31

Member
Canada
(05-13-2018, 08:38 PM)Senate515 Wrote:
(05-13-2018, 08:15 PM)Monchoon Wrote: Being I am from Canada is there a kind soul who could help me with a purchase? PM please if so.


I feel the same way, or is there anyone who has experience with using a re-shipper


Sent from my iPhone using Tapatalk

I use one all the time, if you have questions PM me.
On an eternal den clearing mission at this point.
#32

Member
MD Eastern Shore
(05-13-2018, 07:50 PM)andrewjs18 Wrote:
(05-13-2018, 03:57 PM)explodyii Wrote: Is there an official number on the handle height?  The design is beautiful!

if I recall correctly, the handle height is 52mm.  I'll confirm with Brad as I sent the prototypes back to him.

ESBrushmaker

Yes.  The nominal handle height is 52mm with a maximum width ~42mm.  I try, to the best of my ability, to keep each handle as close as possible to these reference dimensions (please see the prototype/reference handle shown in post #1.)  Please remember, however, that because every brush is hand-crafted, dimensions can be expected to vary slightly.

As Andrew indicates, we're hoping to have the 2018 L.E. brushes available in the June time-frame.  We obviously want to you to have your brush as soon as possible. But, as you can see from post #10, just the "manufacturing" process is somewhat involved (not to mention all the behind the scenes "stuff"  Cool.)  

We'll try to provide updates as things progress.

Thanks for your patience!

explodyii and Blade4vor like this post
#33
Brad, your website has a helpful brush care guide that suggests pressing a brush no more than 1/4 it's loft while splaying. That seems a little light. When I try that, most brushes won't even splay. I generally press close to half the loft. I don't want to ruin my brushes. Do you think you could share a photo of the proper way to spay a brush?
#34

Member
Russia
Wow! It is beautiful!

Matsilainen likes this post
#35

Member
Canada
(05-13-2018, 11:45 PM)MattM97 Wrote:
(05-13-2018, 08:15 PM)Monchoon Wrote: Being I am from Canada is there a kind soul who could help me with a purchase? PM please if so.

Where are you located? I could help you out.

Saskatoon
#36

Member
Canada
(05-16-2018, 04:23 AM)Monchoon Wrote:
(05-13-2018, 11:45 PM)MattM97 Wrote:
(05-13-2018, 08:15 PM)Monchoon Wrote: Being I am from Canada is there a kind soul who could help me with a purchase? PM please if so.

Where are you located? I could help you out.

Saskatoon

PM me I can give you info on a company I use to get items into Canada. Yes it's legal for anyone wondering, they have licenses.

mr. smith, Monchoon and Matsilainen like this post
On an eternal den clearing mission at this point.
#37

Member
MD Eastern Shore
(This post was last modified: 05-18-2018, 12:40 PM by ESBrushmaker.)
(05-14-2018, 07:50 PM)Cino Wrote: Brad,  your website has a helpful brush care guide that suggests pressing a brush no more than 1/4 it's loft while splaying.  That seems a little light.   When I try that,  most brushes won't even splay.  I generally press close to half the loft.  I don't want to ruin my brushes.   Do you think you could share a photo of the proper way to spay a brush?

Thanks for your kind words!  We do try to be helpful.  Idea

I'm kinda heads-down in the shop right now and wish I had some quick illustrative pics; but in their absence, I'll share some thoughts.  The thing is:
this is one of those seemingly simple questions that requires a long answer.  Even so, there is more that could be said.  (Let me also preface my remarks by saying that what I'm about to describe is my preferred method.  There are other ways.  This is not intended to disparage what you--or anyone else--prefer(s).  I'm just trying to point out that every method entails some degree of compromise, as I'll discuss in a minute.

That said:  first of all, I don't find it necessary to splay a brush.  (Others differ--and that's perfectly fine with me.)  Rather, I like to soften the soap first by covering it with warm water for 4-5 minutes (or so) while I'm in the shower or doing something else.  At the same time, I'll also soak the brush in warm water.  Before loading, I'll dump the water from the soap, remove the brush from whatever container it's been soaking in and gently wring some of the excess water out of it.

I load the brush in gentle circular motions letting the tips do the work.  If the brush doesn't load, I'll add a few drops of warm water until it does.  This usually takes around 30-45 seconds.  Once the brush is loaded, I'll add a little more water to work up the desired lather consistency either in a bowl/scuttle or on my face, depending on my mood.

When applying lather, I might start out with a few circular motions, being careful not to press down more than ~1/4 of the way, then finish off with back and forth "paintbrush" strokes.  This method admittedly limits the amount of scrub I get from the brush. So when I want more scrub--and maybe a little scritch--I give my good M&F and BSSW brushes a break and reach for an inexpensive 20mm Simpson Berkeley 46 Pure.  This brush might be a little tough on sensitive skin, but it makes a nice change every once in a while.

The thing to remember is that lather is only soap, water, and air.  The brush simply combines these components--creating lather--and applies it.  What I look for are the most efficient and aesthetically pleasing ways to accomplish these functions.  How you do it is entirely up to you.  Each method entails, as I mentioned before, some degree of compromise.  (Again, I'm not advocating one method over another--just explaining my preferences.)

About compromises.  To me, a shaving brush is a tool:  a very nice tool to be sure, but a tool nonetheless--just like a saw is to a carpenter.  And like the carpenter's saw, all use takes "life" out of a brush.  Brushes eventually wear out just like a saw does.  Some types of use wear brushes out faster than others, just as cutting harder woods wears a saw out faster than cutting softer woods.

The bottom line is that the more pressure we apply to a brush, the greater the stress--and therefore the greater the wear.  At the same time, circular motions twist the fibers, creating forces that wear brushes down faster than back and forth motions.   We see these effects more often with "pointier" (if that's a word) bulb knots--where the central hairs/fibers are shorter than those on the outside.  What eventually happens is that the more we splay the brush, the more we wear down these central hairs--because they bear most of the pressure--eventually resulting in the infamous "donut hole."  Circular motions also increase the stress on the fibers as a result of twisting force.  Certainly, other factors come into play as well:  how well the brush is rinsed and dried between uses, hardness/softness of water, the amount of soap scum buildup on the fibers, etc.

Back in the day, when men typically owned just one, brushes wore out faster, due to constant use, than most of ours do today simply because we tend to own more than one brush. (No kidding, right?)  

Still in all, if I like to splay the heck out of my brushes and apply lather in vigorous circles, what can I do to maximize brush life?  The first thing I must accept is that these actions will shorten brush life.  There's no way around it.  But I can do a few things get the most life out of my brushes.  

  1. Take proper care of them.  I hesitate to say this to a group of experienced wet shavers, but it does bear repeating. (True story:  I gave an expensive brush to one of my sons-in-law about a year ago.  A month or two later, I found that brush upside down in a soap bowl covered (soaked?) in dried-out lather.  The brush was already starting to shed.  Mild disappointment, anyone?)

  2. Rotate my brushes.  Rotations of even two brushes give each time to dry, add variety to our daily routine, and, obviously, extend brush life by spreading out usage v. using one brush every day.

  3. All things being equal, I would buy Fans or Hybrids--or at least Bulbs with flatter crowns as these shapes tend to spread some of the forces exerted on the knot.  (Quick aside:  a flatter crown one of the specifications I give my Chinese knot makers.)

  4. I might look for denser brushes with lower lofts because they tend to be "scrubbier" than those with less dense knots set at higher lofts, possibly requiring less pressure on the knot.  (I can make counter arguments here; but I throw this out for your consideration.)

  5. Finally, if a favorite brush wears out, the maker--or someone else--can often replace the knot.  (I don't recommend that for just any brush, but for a nice expensive or vintage brush, I wouldn't hesitate.

We could easily go into an extended conversation on this topic--and if we do, I might ask the moderators to move it to the General Shaving category.

In any event, I hope at least some of this is helpful.

Best wishes for a good day!

mr. smith, linuxguile, Rebus Knebus and 10 others like this post
#38
Thanks Brad. That clears some things up. I also think that this would make an interesting thread, especially if people are willing to share some fails learned the hard way.

My first brush was an Everready boar that I used daily and rarely rinsed. Like your son in law, I'd just plop it in the old spice mug, knot down, when finished. The brush lasted IIRC, a good 15 years or more, but by the time it was done there were not many bristles left. It looked like Homer Simpson, and it had a "glue" bump of caked soap. After that I quickly ruined a number of drug store boars over another decade or so before I became born again. Now I have better brushes and want to care for them.

ESBrushmaker, Matsilainen and Blade4vor like this post
#39
Great write up of the processs. It’s going to be a beauty.

mr. smith likes this post
(I think I know who No.1 is!)
-Chris
#40

Member
Las Vegas, NV, USA
Brad ESBrushmaker, thanks for sharing your observations and tips concerning brush care. (https://damnfineshave.com/thread-2018-df...#pid207820)

Really a great post to read even for those who already have a lot of experience with brushes.

AP Reserve, Blade4vor, andrewjs18 and 3 others like this post
Whenever I go to shave, I assume there’s someone else on the planet shaving, so I say “I’m gonna go shave, too.”
– Mitch Hedberg


Users browsing this thread: