Hello pogonotomists guys, I would like to ask you where to find the o/rings with which the WHR2 head is equipped in the part that screws onto the handle. Tara wrote to me that the size is: M5 x 10mm x 1mm. I can't find them. Were you successful on the internet? Thank you
(02-24-2023, 02:13 PM)simplyblu Wrote: Hello pogonotomists guys, I would like to ask you where to find the o/rings with which the WHR2 head is equipped in the part that screws onto the handle. Tara wrote to me that the size is: M5 x 10mm x 1mm. I can't find them. Were you successful on the internet? Thank you
https://www.ebay.com/itm/162358602421?mk...media=COPY
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."
Most cheap ones are made of nylon and work ok. The better ones are made of delrin/acetal which is what Wolfman uses, as does Timeless razors. They are harder to find and most machinist will turn those themselves on a lathe however you can buy a 5 pack from Timeless. They grip tighter and will last much longer, at least that has been my experience. Just don't drop them in the sink and see them flush down the drain. Ask me how I know
"Simple: not to be confused with easy."
(02-24-2023, 10:08 PM)simplyblu Wrote: excellent advice Max Spreche, who knows if the Timeless delrin washers have the same measurements as Wolfman: m5 x 10mm x 1mm
I have no issues with using any of the delrin washers from Wolfman or Timeless between any of my DE's. They are all compatible.
"Simple: not to be confused with easy."
I have posted in the BST section about a price I was quoted for some Delrin/acetal washers in bulk. If any of you are interested, let me know. If I can get commitments for another 140 or so washers, I can get them for 59 cents each plus the shipping from me to you (compared to the 5 for $5 plus shipping at Timeless).
John
Users browsing this thread: