O/ring for WHR2

Hello pogonotomists guys, I would like to ask you where to find the o/rings with which the WHR2 head is equipped in the part that screws onto the handle.  Tara wrote to me that the size is: M5 x 10mm x 1mm.  I can't find them.  Were you successful on the internet?  Thank you

Hello pogonotomists guys, I would like to ask you where to find the o/rings with which the WHR2 head is equipped in the part that screws onto the handle.  Tara wrote to me that the size is: M5 x 10mm x 1mm.  I can't find them.  Were you successful on the internet?  Thank you

https://www.ebay.com/itm/162358602421?mk...media=COPY

Amazon has everything and if you have Prime shipping is free and delivers in 2 days.

Menards or Home Depot

Most cheap ones are made of nylon and work ok. The better ones are made of delrin/acetal which is what Wolfman uses, as does Timeless razors. They are harder to find and most machinist will turn those themselves on a lathe however you can buy a 5 pack from Timeless. They grip tighter and will last much longer, at least that has been my experience. Just don't drop them in the sink and see them flush down the drain. Ask me how I know 

excellent advice Max Spreche, who knows if the Timeless delrin washers have the same measurements as Wolfman: m5 x 10mm x 1mm

excellent advice Max Spreche, who knows if the Timeless delrin washers have the same measurements as Wolfman: m5 x 10mm x 1mm

I have no issues with using any of the delrin washers from Wolfman or Timeless between any of my DE's. They are all compatible.

I have posted in the BST section about a price I was quoted for some Delrin/acetal washers in bulk. If any of you are interested, let me know. If I can get commitments for another 140 or so washers, I can get them for 59 cents each plus the shipping from me to you (compared to the 5 for $5 plus shipping at Timeless).

The M5 is the important measurement (ID).  I prefer 8mm OD and 0.5mm thickness.  

Bottom line, any M5 nylon or derlin washer will work.