Karve Overlander

There Can Be Only One?
(not sure who remembers the Highlander franchise - movies/series/comic) 
BFX 
"Got RAD from my DAD".

Head Talk...
I found this on the Karve web site and though it was interesting.

To determine the overall length of a razor with a Christopher Bradley head (regardless of plate level or type), add 0.305" / 7.75mm to the actual value in the table below. Please note, this is not the actual thickness of the head, only a value to determine the overall length of the razor (because the bars droop below the mounting face for the handle tip).

To determine the overall length of razor with an Overlander head, add 0.325" / 8.25mm to the actual value in the table below. Please note, this is not the actual thickness of the head, only a value to determine the overall length of the razor (because the bars droop below the mounting face for the handle tip).


Does anyone have the specs on the "actual thickness of these heads"?
I will answer this myself.
From the Karve Facebook, they said all handles are 12mm.
I question that because they have a new G series (fat), so is the G series also 12mm ? 
Well I will most likely find out myself, since all the Outlanders here could be on vacation...


Cheers
BFX