#151
(This post was last modified: 11-10-2018, 05:44 AM by NJDJ.)
(11-10-2018, 03:08 AM)Shavemd Wrote:
(11-09-2018, 09:10 PM)NJDJ Wrote: Can someone with a Vector post a picture of it on a UFO Titan?  I am very curious how it would look and feel on that handle.   Thanks!

NJDJ If you would like to send me a UFO Titan I would be glad to post as many pics as you want  I'd love to have one LOL

Haha.  How about a picture on a wrh2?
#152
(11-10-2018, 05:02 AM)NJDJ Wrote:
(11-10-2018, 03:08 AM)Shavemd Wrote:
(11-09-2018, 09:10 PM)NJDJ Wrote: Can someone with a Vector post a picture of it on a UFO Titan?  I am very curious how it would look and feel on that handle.   Thanks!

NJDJ If you would like to send me a UFO Titan I would be glad to post as many pics as you want  I'd love to have one LOL

Haha.  How about a picture on a wrh2?
[/quote
Here you go
[Image: 5zBzlIx.jpg][Image: LYKd1HN.jpg][Image: pr0nt22.jpg]

GlazedBoker and Blade4vor like this post
#153
(11-10-2018, 01:22 PM)Shavemd Wrote:
(11-10-2018, 05:02 AM)NJDJ Wrote:
(11-10-2018, 03:08 AM)Shavemd Wrote: NJDJ If you would like to send me a UFO Titan I would be glad to post as many pics as you want  I'd love to have one LOL

Haha.  How about a picture on a wrh2?
[/quote
Here you go
[Image: 5zBzlIx.jpg][Image: LYKd1HN.jpg][Image: pr0nt22.jpg]

Thanks much for those. It looks good in all the shots but the last one. From that angle it looks a little weird. How does it feel in hand? Also, the wrh2 is fairly heavy so I guess that could impact things. A UFO Titan is much lighter (58 grams). What do you think?
#154
NJDJ my WRH2 is Titanium so weight was about the same as the original handle. It felt good in my hand for this morning shave, but I still need to work on technique..The Vector seems to need a little pressure for a solid shave and I’m still working on a way to remove the blade at the end of the shave without slicing my finger.

Flyingbald, Blade4vor and beisler like this post
#155

Merchant
San Diego CA
(11-10-2018, 03:03 PM)Shavemd Wrote: NJDJ my WRH2 is Titanium so weight was about the same as the original handle. It felt good in my hand for this morning shave,  but I still need to work on technique..The Vector seems to need a little pressure for a solid shave and I’m still working on a way to remove the blade at the end of the shave without slicing my finger.

Remove the base plate. Have the top cap with blade facing up. With one hand, pinch the top cap with your thumb on the post and finger on the top of the top cap. With your other hand, pinch the blade at its sides. Then you’ll easily wiggle the two apart and it’ll shimmy right off.

Shavemd, Blade4vor, Flyingbald and 5 others like this post
#156
Thanks Shane. I’ll give it a try.
#157

Merchant
San Diego CA
(11-10-2018, 08:36 PM)Shavemd Wrote: Thanks Shane. I’ll give it a try.

There’s also very slight overhand on the back corners for this reason. Don’t try to get a nail under the blade. Just use the flesh of your fingers and give it a little wiggle.

ANG69 and Blade4vor like this post
#158

It's sharp and it cuts. I like it...
Northeast, USA
(This post was last modified: 11-10-2018, 10:48 PM by GlazedBoker.)
A copy and paste shave off that I had written up last night on another shave forum. Read on.....


The Contestants: Galco Classic Cobra vs Blackland Vector

[Image: 5uVgvlV.jpg]

A quick history on both combatants for tonight’s shave fight.

Galco Classic Cobra: The razor that basically started it all. Yes, this was the one that got the ball rolling in taking Artist Club style blades and using them in a more traditional safety razor format. At the time, it was an ingenious design and forward thinking model that made the wet shaving world take notice. All Brass construction with chrome plating that is smooth on the back side and very well done. An all 1 piece design that has a swivel-locking mechanism to load and secure the AC style blade and a contoured handle with ribbing on the inside to provide grip during the shave. It is a nicely balanced razor with a slight bend at the neck of the head to provide a more intuitive or natural shave experience. Overall, an excellent performing razor that provides a smooth, comfortable shave with superb efficiency to go along with its good, sexy looks. (IMO at least it looks sexy... Winking)

Blackland Razors Vector: This is the new kid on the block but, make no mistake as it has pedigree with it’s other siblings in the Blackland stable that have been great successes as well. A 3 piece, all stainless steel 304 constructed razor with exacting tolerances and finish. Definitely carries the slimmest head profile in the SE razor game that has ever been seen to date. Overall very good balance as well that is evenly distributed with such a small and light razor head. The shaves it provides are also smooth and comfortable with just about an equal or more in efficiency to it’s competitor in tonight’s feature match. And yes, I do think it is a sexy razor.

[Image: 81zOzWq.jpg]

[Image: ugirlKB.jpg]

The Odds: I give the old but established Cobra 3 to 2 over the young but upcoming Vector. I favor the Cobra because I have many more uses with it. I’ve only had 1 shave besides this one tonight with the Vector. Naturally, I am more familiar with the Cobra than I am with the Vector and it’s my sentimental favorite.

[Image: g3OD4k6.jpg]

Supporting Cast in each corner: For tonight’s shave I will be using the following items in support of each of these razor gladiators:
Blades: Schick Proline
Shave soap: Barrister & Mann Seville
Shave brush: Graydog Keyhole 26mm Synthetic
Astringent: Thayers Witch Hazel Lemon
Aftershave: Barrister & Mann Seville splash

Prep is a hot shower and facial scrub to get the whiskers prepped and ready for the steel on nearly 48 hours of growth....

Ding! Ding! Round 1


First Pass WTG: Made up a great lather in my bowl and got these 2 razors going. The Cobra got the right side, the Vector has the left and it will stay that way throughout the whole shave as there is no advantage/disadvantage for either side. Grabbed the Cobra and started at the sideburns and just let the razor drop down along my face. Nice smooth feel without a single hiccup. Cleared the cheeks with a second stroke and moved on to the neck and chin. From the jawline on down it was just a smooth controlled stroke. Got my second and third stroke for half the chin on down to half of Sir Adam. Man, this razor can clear some whiskers with utmost efficiency. No mishaps of any kind. Nice. Grabbed the Vector, went over to the left and started at the sideburns. First stroke and a nice controlled downward movement but, I noticed a bit more hair left behind. Had to readjust and compensate for the lighter head weight on the razor and apply a small, very small amount of pressure. Second stroke, nice and much better clearing of the hair while still staying smooth and comfy. Cleared the cheeks and on to the left side chin and neck. Oooh, nice and smooth with a nice shave feel, like wiping the hair off your face. Cleared it out and did a quick rinse. Both sides had me at CCS with not a single nic, cut or weeper. Hmmm..... This is closer than I thought.

Cold water rinse again.... Ready.

Ding! Ding! Round 2

Second Pass XTG/ATG: This is a hybrid pass as the whiskers on my neck grow east to west from my Adams Apple to my chin then swirl a tiny bit left and right of it. Everywhere else the hairs grow north to south, hence the hybrid xtg/atg pass. I always aim for 2 passes plus clean ups if needed to keep irritation non existent or very low. So, grabbed the Cobra and started on my lower neck and pulled up. Aaahh, what a sweet stroke heading up towards the chin. Same upward stroke two up the jawline to the end of the sideburn. Really nice and smooth. Another stroke and cleared the cheeks and half of the chin. Went to clear the right corner of the mouth beneath the stache and cleared it. But, saw a tiny red dot there and just under the bend of the chin. Two tiny weepers, basically nothing but, there nonetheless. Great pass though. Vector was up and switched to the left. Did the same thing as I did on the right while applying just the slightest amount of pressure and man, this razor just flies up and down while hugging your face. Never giving you the sense that you have to slow down and control your strokes at a slower pace. Made short work of the left corner of my mouth and stache area. Done and put it down. A quick rinse and face feel. Was nearly BBS on both sides with just the slightest bit of growth left behind around the jawline on my right side and a very light patch near Sir Adam on the left. Hmmm..... this is getting real interesting.

Cold water rinse again..... Ready

Third pass/Clean up pass: Grabbed the Cobra, painted on some lather and proceeded to clear out the jawline and chin buff on the right side of my face. Dang! Got me on the last chin buff pass. Minor nic that a cold water splash and alum took care of. Put down the Cobra and grabbed the Vector. Started clearing out the patch on the left side and just decided to finish buffing out the chin and cheeks on both sides. This thing is great for buffs and clean ups. Nimble and light and that thin profile is something sweet! Finished up, cold water rinse and pulled out the alum. Started on the right with no sting on the cheeks until I got to the chin and jawline, not a big sting but, something to let you know that you goofed there. Plus felt a tiny bit on the right corner of the mouth and under the chin where the nic was. Continued on the left and nothing on the cheeks, jawline or neck except for that tiny little patch that I cleaned up and got a little overzealous in picking those up. But, other than that, it was a hell of a BBS finish from both of these wonderful tools. Cleaned up, did my post routine and it was done.

Conclusion/Winner: This was a much closer shave off than I anticipated. The razors both performed flawlessly with a couple of hiccups from the Cobra that probably could be attributed to my carelessness and nothing to do in faulting the razor. If you look closely at the pics above, you will see and get the perception that the Cobra has much more blade exposure/reveal than the Vector but, that’s not the case and certainly not in how they both feel which is quite similar. Blade feel is almost equal with a slight tad more to the Cobra. They both felt smooth and efficient throughout the whole shave. I will say that the Cobra felt like it could and did glide more easily than the Vector. And I attribute that to the chrome finish of the Cobra and giving it that slippery face feel. The Vector on the other hand was easier to move and maneuver anywhere and everywhere on your face, neck and chin but, didn’t glide as easily. With the Cobra, a more traditional technique is used such as let the weight do most of the work and apply no or very little pressure. The Vector contrarily, required one to use and apply a bit of pressure to compensate for the thinner and lighter head. Feel in the hands is great from both razors and I love the ridges and curves on the Cobra but, it was a bit cumbersome when doing switchbacks and quick reversals during the shave. Things that I did not realize before until I received and used the Vector. Easy to maneuver, throw around and make quick reversals coupled with a handle that is quite good and for most will not slip out of the hands gives the Vector a better and easier razor to handle. Tough, tough call here Gents..


The Champ..........

[Image: GCjWdpq.jpg]


It’s a hell of a razor Gents. Make no mistake about it, this razor changes the game for many, myself included. An easy to use razor that is mild, smooth and superbly efficient. Has a natural feel in the hands and is neutrally balanced. Not too light, not too heavy. Just right. Get your hands on one. It will make a believer out of SE doubters in under a 3 pass BBS. No BS or whistling Dixie.....

Snuff, Pottertons, AndyH_STi and 8 others like this post
#159

The Dude Abides
Florida
(This post was last modified: 11-10-2018, 10:17 PM by wingdo.)
Received my Vector this afternoon. I had 4 days growth and immediately took it for a spin. Not having used the razor before, I put a fresh Kai Mild into the head. Before I get into the shave, here are a couple thoughts on the razor itself. The head is small. For a Feather AC system, this is one small head. It's hardly larger than the blade itself. In fact the top plate is so small I had to look several times to make sure I had the cutting edge pointing towards the correct end of the top plate. There is minimal design hints as to which way is which. The angles are that well designed. I also find the top plate doesn't have as much of a machined look as the bottom plate or handle. That's a nit pick at best. I was prepared for issues getting the handle on that funky screw base, but no issues at all. I just lined the two up, unscrewed backwards a bit to make sure threads were lined up and screwed it on. Perfect fir first try.

Now the shave. I personally love the Feather AC blades in shavettes. I can get a nice smooth shave no issues that way, but I have always had some minor issues with every standard razor I have tried which uses the AC blades. There were no issues at all today. It took a moment to find the proper angle and then it was smooth as silk. Three passes, no nicks no irritation. Quite possibly the best AC shave I have ever had. Halfway through the first side of my face, on the first pass, I was in auto-pilot mode. It was that smooth.

I honestly had expected to end up returning the Vector due to the generous return policy Blackland offers, but no way. This thing is a keeper.

Snuff, Matsilainen, Blackland Razors and 5 others like this post
Doug

Careful, man, there's a beverage here! - The Dude
#160
GlazedBoker Great description of the whole part of the shave. Great review of the Cobra Classic ( which for me is the gold standard) and the Vector

Blade4vor, GlazedBoker and Blackland Razors like this post


Users browsing this thread: 1 Guest(s)